Metal structures in 4D - Publications

Publications 2001-2009

PR is short for peer-reviewed contribution, CO is short for paper with external collaborators. Conference proceedings marked with a star (*) marks keynote contributions.

International publications

[1] Capdevila, C.; Chen, Y.L.; Lassen, N.C.K.; Jones, A.R.; Bhadeshia, H.K.D.H., Heterogeneous deformation and recrystallisation of iron base oxide dispersion strengthened PM2000 alloy. Mater. Sci. Technol. (2001) v. 17 p. 693-699 (PR) (CO)
[2] Delannay, L.; Mishin, O.V.; Juul Jensen, D.; Houtte, P. Van, Quantitative analysis of grain subdivision in cold rolled aluminium. Acta Mater. (2001) v. 49 p. 2441-2451 (PR) (CO)
[3] Gao, D.C.; Yang, W.Y.; Huang, X.; Sun, Z.Q., Superplastic deformation in a coarse-grained Fe3Al based alloy. Scripta Mater. (2001) v. 44 p. 501-505 (PR) (CO)
[4] Gao, D.C.; Yang, W.Y.; Huang, X.; Sun, Z.Q., The superplasticity of Fe-28Al-5Cr and Fe-28Al-5Cr-0,5Nb-0.1C alloys. Acta Metall. Sinica (2001) v. 37 p. 291-295 (PR) (CO)
[5] Godfrey, A.; Juul Jensen, D.; Hansen, N., Recrystallisation of channel die deformed single crystals of typical rolling orientations. Acta Mater. (2001) v. 49 p. 2429-2440 (PR) (CO)
[6] Hansen, N., Microstructural evolution during forming of metals. J. Mater. Sci. Technol. (2001) v. 17 p. 409-412 (PR)
[7] Hansen, N.; Huang, X.; Hughes, D.A., Microstructural evolution and hardening parameters. Mater. Sci. Eng. A (2001) v. 317 p. 3-11 (PR) (CO)
[8] Hughes, D.A.; Hansen, N., Graded nanostructures produced by sliding and exhibiting universal behavior. Phys. Rev. Lett. (2001) v. 87 p. 135503.1-135503.4 (PR) (CO)
[9] Lauridsen, E.M.; Schmidt, S.; Suter, R.M.; Poulsen, H.F., Tracking: A method for structural characterization of grains in powders or polycrystals. J. Appl. Cryst. (2001) v. 34 p. 744-750 (PR) (CO)
[10] Li, Z.J.; Godfrey, A.; Liu, Q., Macroscopic sub-division of rolled Al-1%Mn single crystals of {0 0 1}<1 1 0> orientation. Scripta Mater. (2001) v. 45 p. 847-852 (PR) (CO)
[11] Lienert, U.; Keitel, S.; Caliebe, W.; Schulze-Briese, C.; Poulsen, H.F., Source size conserving broad band monochromators of fixed exit geometry for high energy synchrotron radiation. Nucl. Instrum. Methods Phys. Res. A (2001) v. 467-468 p. 659-662 (PR) (CO)
[12] Lienert, U.; Poulsen, H.F.; Kvick, Å., Mesoscale structural characterization within bulk materials by high-energy X-ray microdiffraction. AIAA J. (2001) v. 39 p. 919-923 (PR) (CO)
[13] Magnusson, H.; Juul Jensen, D.; Hutchinsson, B., Growth rates for different texture components during recrystallization of IF steel. Scripta Mater. (2001) v. 44 p. 435-441 (PR) (CO)
[14] Margulies, L.; Winther, G.; Poulsen, H.F., In situ measurement of grain rotation during deformation of polycrystals. Science (2001) v. 291 p. 2392-2394 (PR)
[15] Okada, T.; Ikeda, L.; Huang, X.; Wert, J.A.; Kashihara, K.; Inoko, F., Electron backscatter diffraction analysis of recrystallized grains formed in deformation band in aluminum single crystal. Mater. Trans. (2001) v. 42 p. 1938-1944 (PR) (CO)
[16] Pantleon, W.; Hansen, N., Dislocation boundaries - The distribution function of disorientation angles. Acta Mater. (2001) v. 49 p. 1479-1493 (PR)
[17] Pantleon, W.; Hansen, N., Disorientations in dislocation boundaries: Formation and spatial correlation. Mater. Sci. Eng. A (2001) v. 309 p. 246-250 (PR)
[18] Poulsen, H.F.; Juul Jensen, D.; Tschentscher, T.; Wcislak, L.; Lauridsen, E.M.; Margulies, L.; Schmidt, S., Quantification of minor texture components by hard X-rays. Textures Microstruct. (2001) v. 35 p. 39-54 (PR) (CO)
[19] Poulsen, H.F.; Nielsen, S.F.; Lauridsen, E.M.; Schmidt, S.; Suter, R.M.; Lienert, U.; Margulies, L.; Lorentzen, A.; Juul Jensen, D., Three-dimensional maps of grain boundaries and the stress state of individual grains in polycrystals and powders. J. Appl. Cryst. (2001) v. 34 p. 751-756 (PR) (CO)
[20] Vandermeer, R.A.; Juul Jensen, D., Microstructural path and temperature dependence of recrystallization in commercial aluminum. Acta Mater. (2001) v. 49 p. 2083-2094 (PR)
[21] Winther, G., Use of dislocation structure characterisation in modelling of polycrystal deformation. Mater. Sci. Eng. A (2001) v. 309 p. 486-489 (PR)
[22] Wu, G.L.; Godfrey, A.; Liu, W.; Liu, Q., Macroscopic sub-division of columnar grain aluminium with {0 0 1} orientations following low strain deformation. Scripta Mater. (2001) v. 45 p. 1117-1122 (PR) (CO)
[23] Andersen, L.G.; Poulsen, H.F.; Abrahamsen, A.B.; Jacobsen, B.A.; Tschentscher, T., Microstructural dynamics of Bi-2223/Ag tapes annealed in 8% O2. Supercond. Sci. Technol. (2002) v. 15 p. 190-201 (PR) (CO)
[24] Barlow, C.Y.; Hansen, N.; Liu, Y.L., Fine scale structures from deformation of aluminium containing small alumina particles. Acta Mater. (2002) v. 50 p. 171-182 (PR) (CO)
[25] Bowen, J.R.; Mishin, O.V.; Prangnell, P.B.; Juul Jensen, D., Orientation correlations in aluminium deformed by ECAE. Scripta Mater. (2002) v. 47 p. 289-294 (PR) (CO)
[26] Brooks, J.W.; Sabin, T.J., A comparison of the macromodel and neural network approaches for the prediction of microstructural evolution during hot forging. Proc. Inst. Mech. Eng. B (2001) v. 215 p. 915-925 (PR) (CO)
[27] Hansen, N., New discoveries in deformed metals. Metall. Mater. Trans. A (2001) v. 32 p. 2917-2935 (PR)
[28] Huang, X.; Borrego, A.; Pantleon, W., Polycrystal deformation and single crystal deformation: Dislocation structure and flow stress in copper. Mater. Sci. Eng. A (2001) v. 319-321 p. 237-241 (PR)
[29] Hughes, D.A.; Hansen, N.; Bammann, D.J., Geometrically necessary boundaries, incidental dislocation boundaries and geometrically necessary dislocations. Scripta Mater. (2003) v. 48 p. 147-153 (PR) (CO)
[30] Kramer, M.J.; Margulies, L.; Goldman, A.I.; Lee, P.L., Measuring crystal structure dynamics during polymorphic phase transitions, J. Alloys and Compounds (2002) v. 338 p. 235-241 (PR) (CO)
[31] Kruijver, S.; Sietsma, J.; Offerman, E.; Dijk, N. van; Margulies, L.; Lauridsen, E.M.; Grigull, S.; Poulsen, H.F.; Zwaag, S. van der, In situ observations on the austenite stability in TRIP-steel during tensile testing. Steel Res. (2002) v. 73 p. 236-241 (PR) (CO)
[32] Li, Z.J.; Liu, Q., Microstructure and local crystallography of rolled Al-1Wt%Mn single crystals of {001}<110>orientation. Mater. Sci. Eng. A (2002) v. 338 p. 237-242 (PR) (CO)
[33] Liu, Q.; Huang, X.; Lloyd, D.J.; Hansen, N., Microstructure and strength of commercial purity aluminium (AA 1200) cold-rolled to large strains. Acta Mater. (2002) v. 50 p. 3789-3802 (PR) (CO)
[34] Margulies, L.; Lorentzen, T.; Poulsen, H.F.; Leffers, T., Strain tensor development in a single grain in the bulk of a polycrystal under loading. Acta Mater. (2002) v. 50 p. 1771-1779 (PR) (CO)
[35] Mishin, O.V.; Juul Jensen, D.; Hansen, N., Microstructures and boundary populations in materials produced by equal channel angular extrusion. Mat. Sci. Eng. A (2003) v. 342 p. 320-328 (PR) (CO)
[36] Nielsen, S.F.; Lauridsen, E.M.; Juul Jensen, D.; Poulsen, H.F., A three-dimensional X-ray diffraction microscope for deformation studies of polycrystals. Mater. Sci. Eng. A (2001) v. 319-321 p. 179-181 (PR)
[37] Offerman, S.E.; Dijk, N.H. van; Sietsma, J.; Grigull, S.; Lauridsen, E.M.; Margulies, L.; Poulsen, H.F.; Rekveldt, M.T.; Zwaag, S. van der, Grain nucleation and growth during phase transformations. Science (2002) v. 298 p. 1003-1005 (PR) (CO)
[38] Pantleon, W., The evolution of disorientations for several types of boundaries. Mater. Sci. Eng. A (2001) v. 319-321 p. 211-215 (PR)
[39] Pantleon, W., Disorientations in dislocation structures: Formation and spatial correlation. J. Mater. Res. (2002) v. 17 p. 2433-2441 (PR)
[40] Pantleon, W., Formation of disorientations in dislocation structures during plastic deformation. Solid State Phenom. (2002) v. 87 p. 73-92 (PR)
[41] Poulsen, H.F.; Andersen, N.H.; Andersen, L.G.; Lienert, U., Grain dynamics in Bi-2223 tapes measured by the 3DXRD microscope. Physica C (2002) v. 370 p. 141-145 (PR) (CO)
[42] Wert, J.A., Macroscopic crystal rotation patterns in rolled aluminium single crystals. Acta Mater. (2002) v. 50 p. 3127-3141 (PR)
[43] Winther, G., Slip patterns and preferred dislocation boundary planes. Acta Mater. (2003) v. 51 p. 417-429 (PR)
[44] Apps, P.J.; Bowen, J.R.; Prangnell, P.B., The effect of coarse second-phase particles on the rate of grain refinement during severe deformation processing. Acta Mater. (2003) v. 51 p. 2811-2822 (PR) (CO)
[45] Christiansen, G.; Bowen, J.R.; Lindbo, J., Electrolytic preparation of metallic thin foils with large electron-transparent regions. Mater. Charact. (2002) v. 49 p. 331-335 (PR)
[46] Frello, T; Andersen, N.H.; Baziljevich, M.; Johansen, T.H.; Grivel, J.C.; Poulsen, H.F.; Zimmermann, M. von; Schneider, J.R.; Liang, R.; Dosanjh, P.; Hardy, W.N.; Wolf, T., Superconductivity in an anomalously tetragonal YB2C3O6.62 single crystal: A possible singularity in the structural phase diagram. Phys. Rev. B (2003) v. 67 p. 024509.1-024509.5 (PR) (CO)
[47] Fu, X.; Poulsen, H.F.; Schmidt, S.; Nielsen, S.F.; Lauridsen, E.M.; Juul Jensen, D., Non-destructive mapping of grains in three dimensions. Scripta Mater. (2003) v. 49 p. 1093-1096 (PR)
[48] Huang, X.; Hansen, N., Microstructural evolution during plastic deformation of metals. Curr. Adv. Mater. Process. (2003) v. 16 p. 1284-1287 (PR)
[49] Huang, X.; Tsuji, N.; Hansen, N.; Minamino, Y., Microstructural evolution during accumulative roll-bonding of commercial purity aluminum. Mater. Sci. Eng. A (2003) v. 340 p. 265-271 (PR) (CO)
[50] Hughes, D.A.; Hansen, N., Deformation structures developing on fine scales. Phil. Mag. (2003) v. 83 p. 3871-3893 (PR) (CO)
[51] Kruijver, S.O.; Zhao, L.; Sietsma, J.; Offerman, S.E.; Dijk, N.H. van; Lauridsen, E.M.; Margulies, L.; Grigull, S.; Poulsen, H.F.; Zwaag, S. van der, In situ observations on the mechanical stability of austenite in TRIP-steel. J. Phys. IV (2003) v. 104 p. 499-502 (PR) (CO)
[52] Lauridsen, E.M.; Nielsen, S.F.; Margulies, L.; Schmidt, S.; Poulsen, H.F.; Juul Jensen, D., The three-dimensional X-ray diffraction microscope: 3D maps of grains and grain dynamics in polycrystalline materials. J. Phys. IV (2003) v. 104 p. 495-498 (PR)
[53] Lauridsen, E.M.; Poulsen, H.F.; Nielsen, S.F.; Juul Jensen, D., Recrystallization kinetics of individual bulk grains in 90 % cold-rolled aluminium. Acta Mater. (2003) v. 51 p. 4423-4435 (PR)
[54] Lippmann, T.; Blaha, P.; Andersen, N.H.; Poulsen, H.F.; Wolf, T.; Schneider, J.R.; Schwarz, K.H., Charge density analysis of the YBa2Cu3O6.98. Comparison of theoretical and experimental results. Acta Cryst. (2003) v. A59 p. 437-451 (PR) (CO)
[55] Nielsen, S.F.; Poulsen, H.F.; Beckmann, F.; Thorning, C.; Wert, J.A., Measurements of plastic displacement gradient components in three dimensions using marker particles and synchrotron X-ray absorption microtomography. Acta Mater. (2003) v. 51 p. 2407-2415 (PR) (CO)
[56] Nielsen, S.F.; Schmidt, S.; Lauridsen, E.M.; Yiu, H.; Savoie, J.; Zeng, M.; Juul Jensen, D., Growth kinetics of individual grains during recrystallization with an intermediate cooling cycle. Scripta Mater. (2003) v. 48 p. 513-518 (PR) (CO)
[57] Okada, T.; Huang, X.; Kashihara, K.; Inoko, F.; Wert, J.A., Crystal orientations before and after annealing in an Al single crystal strained in tension. Acta Mater. (2003) v. 51 p. 1827-1839 (PR) (CO)
[58] Pantleon, W., Deformation-induced boundaries and their disorientations. Problems Mater. Sci. (2003) v. 33 p. 142-150 (PR)
[59] Poulsen, H.F., 3DXRD microscopy - a comparison with neutron diffraction. Appl. Phys. A (2002) v. 74 p. S1673-S1675 (PR)
[60] Poulsen, H.F., A six-dimensional approach to microstructure analysis. Phil. Mag. (2003) v. 83 p. 2761-2778 (PR)
[61] Poulsen, H.F.; Fu, X., Generation of grain maps by an algebraic reconstruction technique. J. Appl. Cryst. (2003) v. 36 p. 1062-1068 (PR)
[62] Poulsen, H.F.; Lauridsen, E.M.; Schmidt, S.; Margulies, L.; Driver, J.H., 3D characterisation of microstructure evolution during annealing of a deformed aluminum single crystal. Acta Mater. (2003) v. 51 p. 2517-2529 (PR) (CO)
[63] Poulsen, H.F.; Margulies, L.; Schmidt, S.; Winther, G., Lattice rotations of individual bulk grains. Part 1: 3D X-ray characterization. Acta Mater. (2003) v. 51 p. 3821-3830 (PR)
[64] Poulsen, H.F.; Schmidt, S., Reconstruction of grain boundaries in polycrystals by filtered back-projection of diffraction spots. J. Appl. Cryst. (2003) v. 36 p. 319-325 (PR)
[65] Sabin, T.J.; Winther, G.; Juul Jensen, D., Orientation relationships between recrystallization nuclei at triple junctions and deformed structures. Acta Mater. (2003) v. 51 p. 3999-4011 (PR)
[66] Schmidt, S.; Poulsen, H.F.; Vaughan, G.B.M., Structural refinements of the individual grains within polycrystals and powders. J. Appl. Cryst. (2003) v. 36 p. 326-332 (PR) (CO)
[67] Vandermeer, R.A.; Juul Jensen, D., Reply to comment on ''Microstructural path and temperature dependence of recrystallization in commercial aluminum''. Scripta Mater. (2003) v. 48 p. 1565-1567 (PR)
[68] Vandermeer, R.A.; Juul Jensen, D., Recrystallization in hot vs cold deformed commercial aluminium: a microstructure path comparison. Acta Mater. (2003) v. 51 p. 3005-3018 (PR)
[69] Wert, J.A.; Huang, X.; Inoko, F., Deformation bands in a [110] aluminium single crystal strained in tension. Proc. Royal Soc. London Ser. A (2003) v. 459 p. 85-108 (PR) (CO)
[70] Wert, J.A.; Huang, X., Extended planar boundary inclinations in fcc single crystals and polycrystals subjected to plane strain deformation. Phil. Mag. (2003) v. 83 p. 969-983 (PR)
[71] Barlow, C.Y.; Nielsen, P.; Hansen, N., Multilayer roll bonded aluminium foil: Processing, microstructure and flow stress. Acta Mater. (2004) v. 52, 3967-3972 (PR) (CO)
[72] Bowen, J. R.; Prangnell, P. B.; Jensen Juul D.; Hansen. N., Microstructural parameters and flow stress in Al-0.13% Mg deformed by ECAE processing. Mater. Sci. Eng. A (2004) v. 387-389C p. 235-239. (PR) (CO)
[73] Gundlach, C.; Pantleon, W.; Lauridsen, E.M.; Margulies, L.; Doherty, R.D.; Poulsen, H.F., Direct observation of subgrain evolution during recovery of cold-rolled aluminium. Scripta Mater. (2004) v. 50 p. 477-481 (PR)
[74] Haldar, A.; Huang, X.; Leffers, T.; Hansen, N.; Ray, RK, Grain orientation dependence of microstructures in a warm rolled IF steel. Acta Mater. (2004) v. 52 p. 5405-5418 (PR) (CO)
[75] Hansen, N., Preface to the viewpoint set: ''Metals and alloys with a structural scale from the micrometre to the atomic dimensions''. Scripta. Mater. (2004) v. 51 p. 751-753 (PR)
[76] Hansen, N., Hall-Petch relation and boundary strengthening. Scripta Mater. (2004) v. 51 p. 801-806 (PR)
[77] Hansen, N.; Huang, X.; Ueji, R.; Tsuji, N., Structure and strength after large strain deformation. Mater. Sci. Eng. A (2004) v. 387-389C p. 191-194 (PR) (CO)
[78] Hansen, N.; Huang, X.; Winther, G.; Xing, Q., Deformation microstructures and their orientation dependency. TMS Lett. (2004) v. 1 p. 73-74 (PR)
[79] Hansen, N.; Huang, X.; Xing, Q., Structural refinement and coarsening in deformed metals. Solid State Phenom. (2005) v. 101-102 p. 279-286 (PR)
[80] Huang, X.; Hansen, N. Flow stress and microstructures of fine grained copper. Mater. Sci. Eng. A (2004) v. 387-389C p. 186-190 (PR)
[81] Huang, X.; Yang, W.Y.; Sun, Z.Q., Enhanced ductility in coarse grained Fe_2Al alloys. Intermetallics (2004) v. 12 p. 1019-1023 (PR) (CO)
[82] Juul Jensen, D.; Bowen, J.R.; Mishin, O.V., Orientation correlations in metal structures from the micrometer to nanometer range. Solid State Phenom. (2005) v. 101-102 p. 307-314 (PR) (CO)
[83] Juul Jensen, D.; Fu, X. Schmidt, S., Non-destructive characterisation of grain boundaries in 3D, TMS Lett. (2004) v. 1 p. 97-98 (PR)
[84] Juul Jensen, D.; Lauridsen, E.M.; Schmidt, S.; Vandermeer, R.A., Growth aspects of recrystallization. TMS Lett. (2004) v. 1 p. 69-70 (PR)
[85] Larsen, A.W.; Juul Jensen, D., Automatic determination of recrystallization parameters in metals by electron bacscatter pattern line scans. Mater. Charact. (2003) v. 51 p. 271-282 (PR)
[86] Li, B.L.; Godfrey, A.; Meng, Q.C.; Liu, Q.; Hansen, N., Microstructural evolution of IF_steel during cold rolling. Acta Mater. (2004) v. 52 p. 1069-1081 (PR) (CO)
[87] Li, Z.J.; Winther, G.; Hansen,N., Anisotropy of plastic deformation in rolled aluminium. Mater. Sci. Eng. A (2004) v. 387-389C p. 199-202 (PR)
[88] Lienert, U.; Han, T.S.; Almer, J.; Dawson, P.R.; Leffers, T.; Margulies, L.; Nielsen, S.F.; Poulsen, H.F.; Schmidt, S., Investigating the effect of grain interaction during plastic deformation of copper. Acta Mater. (2004) v. 52 p. 4461-4467 (PR) (CO)
[89] Markussen, T.; Fu, X.W.; Margulies, L.; Lauridsen, E.M.; Nielsen, S.F.; Schmidt, S.; Poulsen, H.F., An algebraic algorithm for generation of three-dimensional grain maps based on diffraction with a wide beam of hard X-rays. J. Appl. Cryst. (2004) v. 37 p. 96-102 (PR) (CO)
[90] Martins, R.V.; Margulies, L.; Schmidt, S.; Poulsen, H.F.; Leffers, T., Simultaneous measurement of the strain tensor of 10 individual grains embedded in an Al tensile sample. Mater. Sci. Eng. A (2004) v. 387-389C p. 84-88 (PR) (CO)
[91] Mishin, O.V.; Bay, B.; Winther, G.; Juul Jensen, D., The effect of roll gap geometry on microstructure in cold-rolled aluminium. Acta Mater. (2004) v. 52 p. 5761-5770 (PR) (CO)
[92] Nielsen, S. F.; Beckmann, F; Poulsen, H. F.; Wert, J. A., Measurement of the components of plastic displacement gradients in three dimensions. Mater. Sci. Eng. A (2004) v. 387-389C p. 336-338 (PR) (CO)
[93] Offerman, S.E.; Dijk, N.H. van; Sietsma, J.; Lauridsen, E.M.; Margulies, L.; Grigull, S.; Poulsen, H.F.; Zwaag, S. van der, Solid-state transformations involving solute partitioning: Modeling and measuring on the level of individual grains. Acta Mater. (2004) v. 52 p. 4757-4766 (PR) (CO)
[94] Offerman, S.E.; Dijk, N.H. van; Sietsma, J.; Zwaag, S. van der; Lauridsen, E.M.; Margulies, L.; Grigull, S.; Poulsen, H.F., Reply to the discussion by Aaronson et al. to ''Grain nucleation and growth during phase transformations'' by S.E. Offerman et al., Science, 298, 1003 (November 1, 2002). Scripta Mater. (2004) v. 51 p. 937-941 (PR) (CO)
[95] Pantleon, W., Stage IV work-hardening related to disorientations in dislocation structures. Mater. Sci. Eng. A (2004) v. 387-389 p. 257-261 (PR)
[96] Pantleon, W.; Poulsen, H.F.; Almer, J.; Lienert, U., In-situ X-ray peak shape analysis of embedded individual grains during plastic deformation of metals. Mater. Sci. Eng. A (2004) v. 387-389 p. 339-342 (PR)
[97] Poulsen, H.F., 3DXRD: Grain maps, grain dynamics and grain refinements. Crystall. Rev. (2004) v. 10 p. 29-43 (PR)
[98] Poulsen, H.F.; Bowen, J.R.; Gundlach, C., Characterising the dynamics of individual embedded dislocation structures. Scripta Mater. (2004) v. 51 p. 783-788 (PR)
[99] Prangnell, P.B.; Bowen, J.R.; Apps, P.J., Ultra-fine grain structures in aluminium alloys by severe deformation processing. Mater. Sci. Eng. A (2004) v. 375-377 p. 178-185 (PR) (CO)
[100] Prangnell, P.B.; Hayes, J.S.; Bowen, J.R.; Apps, P.J.; Bate, P.S., Continuous recrystallisation of lamellar deformation structures produced by severe deformation. Acta Mater. (2004) v. 52 p. 3193-3206 (PR) (CO)
[101] Schmidt, S.; Nielsen, S.F.; Gundlach, C.; Margulies, L.; Huang, X.; Juul Jensen, D., Watching the growth of bulk grains during recrystallization of deformed metals. Science (2004) v. 305 p. 229-232 (PR)
[102] Vaughan, G.B.M.; Schmidt, S.; Poulsen, H.F. Multicrystal Approach to Crystal Structure Solution and Refinement. Z. Kristall. (2004) v. 219, 813-825 (PR) (CO)
[103] Wert, J. A., Comments on "An Alternative Physical Explanation of the Hall-Petch Relation". Scripta Materialia (2004) v. 50 p. 1487-1490 (PR)
[104] Winther, G.; Huang, X.; Godfrey, A.; Hansen, N., Critical comparison of dislocation boundary alignment studied by TEM and EBSD: Technical issues and theoretical consequences. Acta Mater. (2004) v. 52 p. 4437-4446 (PR)
[105] Winther, G.; Margulies, L.; Poulsen, H.F., Orientation changes of individual bulk grains during deformation. TMS Lett. (2004) v. 1 p. 75-76 (PR)
[106] Winther, G.; Margulies, L.; Schmidt, S.; Poulsen, H.F., Lattice rotations of individual bulk grains. Part 2: Correlation with initial orientation and model comparison. Acta Mater. (2004) v. 52 p. 2863-2872 (PR)
[107] Barfod, R.; Eriksen, J.; Golding, B.T.; Hammershøi, A.; Jacobsen, T.A.; Langkilde, A.; Larsen, S.; Mønsted, O; Sargeson, A.M.; Sørensen, H.O., Facile cobalt(III) template synthesis of novel branched hexadentate polyamine monocarboxylates. Dalton Trans. (2005) p. 491-500 (PR) (CO)
[108] Birk, T.; Sørensen, H.O.; Bendix, J., Two square-pyramidal chromium(V)-nitride complexes: bis(2-methylquinolin-8-olato)nitridochromium(V) and nitridobis (2-sulfidopyridine N-oxide) chromium(V). Acta Cryst. (2005) v. C61 p. m231-233 (PR) (CO)
[109] Bowen, J.R., Effects of strain on the microstructure-hardness annealing response of highly deformed Al-0.13 Mg. Mat. Sci. Tech. (2005) v. 21 p. 1460-1465 (PR)
[110] Godfrey, A.; Cao, W.Q.; Hansen, N.; Liu, Q., Stored energy, microstructure, and flow stress of deformed metals. Metall. Mater. Trans. A (2005) v. 36 p. 2371-2378 (PR) (CO)
[111] Godiksen, R.B.; Trautt, Z.T.; Upmanyu, M.; Schmidt, S.; Juul Jensen, D. Towards atomic level simulations of recrystallisation - setting up suitable geometry. Mat. Sci. Tech. (2005) v. 21 p. 1373-1375 (PR) (CO)
[112] Gundlach, C; Schmidt, S.; Margulies, L.; Knudsen, T.; Pantleon, W.; Poulsen, H.F., Image analysis for X-ray studies of the dynamics of individual embedded subgrains during recovery. Mat. Sci. Tech. (2005) v. 21 p. 1476-1479. (PR)
[113] Haldrup, K.; Nielsen, S.F.; Beckmann, F.; Wert, J.A., Plastic strain measurements: from 2D to 3D. Mat. Sci. Tech. (2005) v. 21 p. 1428-1431 (PR) (CO)
[114] Hansen, N., Boundary strengthening over five length scales. Adv. Eng. Mater. (2005) v. 7 p. 815-821 (PR)
[115] Hansen, N.; Li, Z.J.; Winther, G., Flow stress anisotropy and hardening parameters. Mat. Sci. Tech. (2005) v. 21 p. 1423-1427 (PR)
[116] Hansen, N., Boundary strengthening in undeformed and deformed polycrystals. Mat. Sci. Eng. A (2005) v. 409 p. 39-45 (PR)
[117] He, Y.; Huang, X.; Hansen, N.; Winther, G., Effect of grain orientation on microstructures of aluminium in warm tension. Mat. Sci. Tech. (2005) v. 21 p. 1471-1475 (PR)
[118] Huang, X., Precise determination of extended dislocation boundary plane in transmission electron microscopy. Mat. Sci. Tech. (2005) v. 21 p. 1379-1382 (PR)
[119] Jakobsen, B.; Niss, K.; Boye Olsen, N., Dielectric and shear mechanical alpha and beta relations in seven glass-forming liquids. J. Chem. Phys. (2005) v. 123 p. 23411 (PR) (CO)
[120] Knudsen, E., 3D grainmap generation with the algebraic reconstruction technique from 3DXRD data. Mat. Sci. Tech. (2005) v. 21 p. 1376-1378 (PR)
[121] Larsen, A.W.; Poulsen, H.F.; Margulies, L.; Gundlach, C.; Xing, Q.F.; Huang, X.; Juul Jensen, D., Nucleation of recrystallization observed in situ in the bulk of a deformed metal. Scripta Mater. (2005) v. 53 p. 553-557 (PR)
[122] Li, Z.J.; Winther, G.; Hansen, N., Anisotropy in rolled metals induced by dislocation structure. Acta Mater. (2006) v. 54 p. 401-410 (PR)
[123] Luan, B.F.; Wu, G.H.; Liu, W.; Hansen, N.; Lei, T.Q., High strength Al2O3p/2024Al composites - effect of particles, subgrains and precipitates. Mat. Sci. Tech. (2005) v. 21 p. 1440-1443 (PR) (CO)
[124] Martins, R.V.; Lienert, U.; Margulies, L.; Pyzalla, A., Determination of the radial crystallite microstrain distribution within an AlMg3 torsion sample using monochromatic synchrotron radiation. Mater. Sci. Eng. A (2005) v. 402 p. 278-287 (PR) (CO)
[125] Mossin, S.; Sørensen, H.O.; Weihe, H.; Glerup, J.; Søtofte, I., Manganese(III) cyclam complexes with aqua, iodo, nitrito, perchlorato and acetic acid/acetato axial ligands. Inorg. Chim. Acta (2005) v. 358 p. 1096-1106 (PR) (CO)
[126] Nielsen, C.B.; Pittelkow, M.; Sørensen, H.O., 2-(4-Bromophenyl)-1-methyl-1H-phenanthro[9,10-d]imidazole. Acta Cryst. E (2005) v. 61 p. 0955-0956 (PR) (CO)
[127] Nielsen, C.B.; Pittelkow, M.; Sørensen, H.O., 2,5-dimethoxybenzene-1,4-dicarbaldehyde. Acta Cryst. E (2005) v. 61 p. 0473-0474 (PR) (CO)
[128] Niss, K.; Jakobsen, B.; Olsen, N.B., Dielectric and shear mechanical relaxations in glass-forming liquids: A test of the Gemant-DiMarzio-Bishop model. J. Chem. Phys. (2005) v. 123 p. 234510 (PR) (CO)
[129] Offerman, S.E.; Dijk, N.H. van; Sietsma, J.; Lauridsen, E.M.; Margulies, L.; Grigull, S.; Poulsen, H.F.; Zwaag, S. van der, 3DXRD microscopy for the study of solid-state phase transformation kinetics. 4th conference on synchrotron radiation in materials science, Grenoble (FR), 23-25 Aug 2004. Nucl. Instrum. Methods Phys. Res. B (2005) v. 238 p. 107-110 (PR) (CO)
[130] Pantleon, W., On the apparent saturation of the average disorientation angle with plastic deformation. Scripta Mater. (2005) v. 53 p. 757-762 (PR)
[131] Pantleon, W., Retrieving orientation correlations in deformation structures from orientation maps. Mat. Sci. Tech. (2005) v. 21 p. 1392-1396 (PR)
[132] Poulsen, H.F.; Wert, J.A.; Neuefeind, J.; Honkimaki, V.; Daymond, M., Measuring strain distributions in amorphous materials. Nature Materials (2005) v. 4 p. 33-36 (PR) (CO)
[133] Poulsen, H.F.; Lienert, U.; Pantleon, W. Characterisation of orientation distributions of individual grains within deformed metals. Mat. Sci. Tech. (2005) v. 21 p. 1397-1400 (PR) (CO)
[134] Rae, A.D.; Mossin, S.; Sørensen, H.O., Structure refinement of a twinned pseudo symmetric crystal of [Mn(C10H24N4) (NCO)2]+.ClO4-. Acta Cryst. (2005) v. B61 p. 407-417 (PR) (CO)
[135] Sørensen, H.O.; Magnussen, M.; Stuhr-Hansen, N., (E,E,E)-1.3.5-Tris[4-acetylsulfanyl)-styryl]benzene toluene hemisolvate. Acta Cryst. C (2005) v. 61 p. 503-0505 (PR) (CO)
[136] Schmidt, S.; Juul Jensen, D., Metal structures in four dimensions. Arch. Metall. Mater. (2005) v. 50 p.181-187 (PR)
[137] Thorning, C.; Somers, M.A.J.; Wert, J.A., Grain interaction effects in polycrystalline Cu. Mater. Sci. Eng. A (2005) v. 397 p. 215-228 (PR) (CO)
[138] Vandermeer, R.A., Microstructural descriptors and the effects of nuclei clustering on recrystallization path kinetics. Acta Mater. (2005) v. 53 p.1449-1457 (PR)
[139] Wert, J.A.; Kashihara, K.; Okada, T.; Huang, X.; Inoko, F., Deformation band evolution in [110] Al single crystals strained in tension. Phil. Mag. (2005) v. 85 p. 1989-2006 (PR) (CO)
[140] Winther, G., Effect of grain orientation dependent microstructures on flow stress anisotropy modelling. Scripta. Mater. (2005) v. 52 p. 995-1000 (PR)
[141] Wu, G.L.; Godfrey, A.; Juul Jensen, D.; Liu, Q., Deformation strain inhomogeneity in columnar grain nickel. Scripta Mater. (2005) v. 53 p. 565-570 (PR) (CO)
[142] Wu, G.L.; Juul Jensen, D., Recrystallisation kinetics of alumnium AA1200 cold rolled to true strain of 2. Mat. Sci. Tech. (2005) v. 21 p. 1407-1411 (PR)
[143] Abildgaard, J.; Hansen, P.E.; Josephsen, J.; Hansen, B.K.V.; Sørensen, H.O.; Larsen, S., Synthesis and characterization of nickel-, palladium- and platinum (II) complexes of three o,o'-dihydroxydiarylazo dyes: Determination of the coordination geometry of this comprehensive series of tridentate diaryl dye complexes by combining results from NMR and X-ray experiments with theoretical ab initio calculations. Inorg. Chim. Acta (2006) v. 359 p. 4493-4502 (PR) (CO)
[144] Alpers, A.; Poulsen, H.F.; Knudsen, E.; Herman, G.T., A discrete tomography algorithm for improving the quality of three-dimensional X-ray diffraction grain maps. J. Appl. Cryst. (2006) v. 39 p. 582-588 (PR) (CO)
[145] Ciston, J.; Marks, L.D.; Feidenhans'l, R.; Bund, O.; Falkenberg, G.; Lauridsen, E.M., Experimental surface charge density of the Si (100)-2x1H surface. Phys. Rev. B (2006) v. 74, 085401 (5 p) (PR) (CO)
[146] Fu, X.; Knudsen, E.; Poulsen, H.F.; Herman, G.T.; Carvalho, B.M.; Liao, H.Y., Optimized algebraic reconstruction technique for generation of grain maps based on three-dimensional X-ray diffraction (3DXRD). Opt. Eng. (2006) v. 45, 116501 (9 p.) (PR) (CO)
[147] Hagen, A.; Poulsen, H.F.; Klemensø, T.; Martins, R.V.; Honkimäki, V.; Buslaps, T.; Feidenshans'l, R., A depth-resolved in-situ study of the reduction and oxidation of Ni-based anodes in solid oxide fuel cells. Fuel Cells (2006) v. 6 p. 361-366 (PR) (CO)
[148] Haldrup, K.; Nielsen, S.F.; Beckmann, F.; Wert, J.A., Inhomogeneous plastic flow investigated by X-ray absorption microtomography of an aluminium alloy containing marker particles. J. Microsc. (2006) v. 222 p. 28-35 (PR) (CO)
[149] Hansen, N.; Huang, X.; Pantleon, W.; Winther, G., Grain orientation and dislocation patterns. Phil. Mag. (2006) v. 86 p. 3981-3994 (PR)
[150] Huang, X.; Hansen, N.; Tsuji, N., Hardening by annealing and softening by deformation in nanostructured metals. Science (2006) v. 312 p. 249-251 (PR)
[151] Jakobsen, B.; Poulsen, H.F.; Lienert, U.; Almer, J.; Shastri, S.D.; Sørensen, H.O.; Gundlach, C.; Pantleon, W., Formation and subdivision of deformation structures during plastic deformation. Science (2006) v. 312 p. 889-892 (PR) (CO)
[152] Kamikawa, N.; Tsuji, N.; Huang, X.; Hansen, N., Quantification of annealed microstructures in ARB processed aluminum. Acta Mater. (2006) v. 54 p. 3055-3066 (PR) (CO)
[153] Kashihara, K.; Wert, J.A., The effect of a grain boundary on deformation in an aluminum bicrystal with a common tensile axis of [100]. Mater. Trans. (2006) v. 47 p. 233-238 (PR) (CO)
[154] Lauridsen, E.M.; Dey, S.R.; Fonda, R.W.; Juul Jensen, D., Nondestructive approaches for 3-D materials characterization. J. Microsc. (2006) v. 58 p. 40-44 (PR)
[155] Lauridsen, E.M.; Schmidt, S.; Nielsen, S.F.; Margulies, L.; Poulsen, H.F.; Juul Jensen, D., Non-destructive characterization of recrystallization kinetics using three-dimensional X-ray diffraction microscopy. Scripta Mater. (2006) v. 55 p. 51-56 (PR)
[156] Morito, S.; Huang, X.; Furuhara, T.; Maki, T.; Hansen, N., The morphology and crystallography of lath martensite in alloy steels. Acta Mater. (2006) v. 54 p. 5323-5331 (PR) (CO)
[157] Morito, S.; Yoshida, H.; Maki, T.; Huang, X., Effect of block size on the strength of lath martensite in low carbon steels. Mater. Sci. Eng. A (2006) v. 438-440 p.237-240 (PR) (CO)
[158] Offerman, S.E.; Dijk, N.H. van; Sietsma, J.; Lauridsen, E.M.; Margulies, L.; Grigull, S.; Poulsen, H.F.; Zwaag, S. van der, Phase transformations in steel studied by 3DXRD microscopy. Nucl. Instrum. Methods Phys. Res. B (2006) v. 246 p. 194-200 (PR) (CO)
[159] Rios, P.R.; Godiksen, R.B.; Schmidt, S.; Juul Jensen, D.; Vandermeer, R.A., Analytical expression for the evolution of interfacial area density between transformed grains during nucleation and growth transformations. Scripta Mater. (2006) v. 54 p. 1509-1513 (PR) (CO)
[160] Sørensen, H.O.; Jakobsen, B.; Knudsen, E.; Lauridsen, E.M.; Nielsen, S.F.; Poulsen, H.F.; Schmidt, S.; Winther, G.; Margulies, L., Mapping grains and their dynamics in three dimensions. Nucl. Instrum. Methods Phys. Res. B (2006) v. 246 p. 232-237 (PR)
[161] Xing, Q.; Huang, X.; Hansen, N., Recovery of heavily cold-rolled aluminum: Effect of local texture. Metall. Mater. Trans. A (2006) v. 37 p. 1311-1322 (PR)
[162] Kamikawa, N.; Sakai, T.; Tsuji, N., Effect of redundant shear strain on microstructure and texture evolution during accumulative roll-bonding in ultralow carbon IF steel. Acta Mater. (2007) 55 , 5873-5888 (PR) (CO)
[163] Fonda, R.W.; Lauridsen, E.M.; Ludwig, W.; Tafforeau, P.; Spanos, G., Two-dimensional and three-dimensional analyses of sigma precipitates and porosity in a superaustenitic stainless steel. Metall. Mater. Trans. A (2007) 38A , 2721-2726 (PR) (CO)
[164] Winther, G.; Huang, X., Dislocation structures. Part 2. Slip system dependence. Phil. Mag. (2007) 83 , 5215-5235 (PR)
[165] Huang, X.; Winther, G., Dislocation structures. Part 1. Grain orientation dependence. Phil. Mag. (2007) 83 , 5189-5214 (PR)
[166] Godiksen, R.B.; Trautt, Z.T.; Upmanyu, M.; Schiøtz, J.; Juul Jensen, D.; Schmidt, S., Simulations of boundary migration during recrystallization using molecular dynamics. Acta Mater. (2007) 55 , 6383-6391 (PR) (CO)
[167] Wu, G.L.; Juul Jensen, D., Orientations of recrystallization nuclei developed in columnar-grained Ni at triple junctions and a high-angle grain boundary. Acta Mater. (2007) 55 , 4955-4964 (PR)
[168] Godfrey, A.; Hansen, N.; Juul Jensen, D., Microstructural-based measurement of local stored energy variations in deformed metals. Metall. Mater. Trans. A (2007) 38 , 2329-2339 (PR) (CO)
[169] Fonda, R.W.; Wert, J.A.; Reynolds, A.P.; Tang, W., Friction stir welding of single crystal aluminium. Sci. Technol. Weld. Join. (2007) 12 , 304-310 (PR) (CO)
[170] Kamikawa, N.; Tsuji, N.; Huang, X.; Hansen, N., Through-thickness characterization of microstructure and texture in high purity aluminum processed to high strain by accumulative roll-bonding. Mater. Trans. (2007) 48 , 1978-1985 (PR) (CO)
[171] Germain, L.; Dey, S.R.; Humbert, M.; Gey, N., Determination of parent orientation maps in advanced titanium-based alloys. J. Microsc. Oxford (2007) 227 , 284-291 (PR) (CO)
[172] Wert, J.A.; Huang, X.; Winther, G.; Pantleon, W.; Poulsen, H.F., Revealing deformation microstructures. Mater. Today (2007) 10 , 24-32 (PR)
[173] Cheng, M.; Zhang, S.H.; Wert, J.A., Finite element analysis of microimprinting of bulk metallic glasses in supercooled liquid regime. J. Mater. Sci. (2007) 42 , 5999-6003 (PR) (CO)
[174] Dey, S.R.; Bouzy, E.; Hazotte, A., Intragranular nucleation sites of massive gamma grains in a TiAl-based alloy. Scripta Mater. (2007) 57 , 365-368 (PR) (CO)
[175] Godiksen, R.B.; Schmidt, S.; Juul Jensen, D., Effects of distributions of growth rates on recrystallization kinetics and microstructure. Scripta Mater. (2007) 57 , 345-348 (PR)
[176] Godiksen, R.B.; Rios, P.R.; Vandermeer, R.A.; Schmidt, S.; Juul Jensen, D., Three-dimensional geometric simulations of random anisotropic growth during transformation phenomena. Scripta Mater. (2008) 58 , 279-282 (PR) (CO)
[177] Ludwig, W.; Lauridsen, E.M.; Schmidt, S.; Poulsen, H.F.; Baruchel, J., High-resolution three-dimensional mapping of individual grains in polycrystals by topotomography. J. Appl. Cryst. (2007) 40 , 905-911 (PR) (CO)
[178] Li, X.L.; Liu, W.; Godfrey, A.; Juul Jensen, D.; Liu, Q., Development of the cube texture at low annealing temperatures in highly rolled pure nickel. Acta Mater. (2007) 55 , 3531-3540 (PR) (CO)
[179] Jakobsen, B.; Poulsen, H.F.; Lienert, U.; Pantleon, W., Direct determination of elastic strains and dislocation densities in individual subgrains in deformation structures. Acta Mater. (2007) 55 , 3421-3430 (PR) (CO)
[180] Reddy, S.M.; Timms, N.E.; Pantleon, W.; Trimby, P., Quantitative characterization of plastic deformation of zircon and geological implications. Contrib. Mineral. Petrol. (2007) 153 , 625-645 (PR) (CO)
[181] Zhang, H.W.; Hansen, N., Deformed metals and alloys with a structural scale from 5 nm to 100 nm. J. Mater. Sci. (2007) 42 , 1682-1693 (PR)
[182] Huang, X., Characterization of nanostructured metals produced by plastic deformation. J. Mater. Sci. (2007) 42 , 1577-1583 (PR)
[183] Gumm, A.; Hammershøi, A.; Kofod-Hansen, M.; Mønsted, O.; Sørensen, H.O., First aminoacetone chelate:[Co(tren){NH2CH2C(O)CH3}]3+ - a substrate binding and activation model for zinc(II)-dependent 5-aminolaevulinic acid dehydratase. Dalton Trans. (2007) (no.30) , 3227-3231 (PR) (CO)
[184] Rodek, L.; Poulsen, H.F.; Knudsen, E.; Herman, G.T., A stochastic algorithm for reconstruction of grain maps of moderately deformed specimens based on X-ray diffraction. J. Appl. Cryst. (2007) 40 , 313-321 (PR) (CO)
[185] Luan, B.F.; Wu, G.H.; Hansen, N.; Godfrey, A.; Lei, T.Q., High strength Al2O3p/6061 Al composites: effect of particles, subgrains and precipitates. Mater. Sci. Technol. (2007) 23 , 233-236 (PR) (CO)
[186] Jakobsen, B.; Poulsen, H.F.; Lienert, U.; Huang, X.; Pantleon, W., Investigation of the deformation structure in an aluminium magnesium alloy by high angular resolution three-dimensional X-ray diffraction. Scr. Mater. (2007) 56 , 769-772 (PR) (CO)
[187] Bowen, J.R.; Masui, T.; Tsuji, N., Microstructure evolution after large strain deformation in Al-0.13%Mg. Mater. Sci. Forum (2007) 550 , 235-240 (PR) (CO).
[188] Hansen, N.; Huang, X.; Winther, G., Grain orientation, deformation microstructure and flow stress. Materials Science and Engineering A (2008) 494 (no.1-2) , 61-67 (PR)
[189] Godiksen, R.B.; Schmidt, S.; Juul Jensen, D., Molecular dynamics simulations of grain boundary migration during recrystallization employing tilt and twist dislocation boundaries to provide the driving pressure. Modelling and Simulation in Materials Science and Engineering (2008) 16 , 065002 (PR)
[190] Haldrup, K.; Beckmann, F.; Nielsen, S.F.; Wert, J.A., Experimental determination of strain partitioning among individual grains in the bulk of an aluminium multicrystal. Materials Characterization (2008) 59 , 842-851 (PR) (CO)
[191] Hansen, N.; Huang, X.; Møller, M.G.; Godfrey, A., Thermal stability of aluminum cold rolled to large strain. Journal of Materials Science (2008) 43 , 6254-6259 (PR) (CO)
[192] Huang, X.; Kamikawa, N.; Hansen, N., Property optimization of nanostructured ARB-processed Al by post-process deformation. Journal of Materials Science (2008) 43 (no.23-24) , 7397-7402 (PR)
[193] Huang, X.; Kamikawa, N.; Tsuji, N.; Hansen, N., Nanostructured aluminum and IF steel produced by rolling - a comparative study. ISIJ International (2008) 48 , 1080-1087 (PR) (CO)
[194] Juul Jensen, D.; Offerman, S.E.; Sietsma, J., 3DXRD characterization and modeling of solid-state transformation processes. MRS Bulletin (2008) 33 , 621-629 (PR) (CO)
[195] Kamikawa, N.; Huang, X.; Hansen, N., Tailoring structures through two-step annealing process in nanostructured aluminum produced by accumulative roll-bonding. Journal of Materials Science (2008) 43 (no.23-24) , 7313-7319 (PR)
[196] Knudsen, T.; Cao, W.Q.; Godfrey, A.; Liu, Q.; Hansen, N., Stored energy in nickel cold rolled to large strains, measured by calorimetry and evaluated from the microstructure. Metall. Mater. Trans. A (2008) 39 , 430-440 (PR) (CO)
[197] Ludwig, W.; Schmidt, S.; Lauridsen, E.M.; Poulsen, H.F., X-ray diffraction contrast tomography: a novel technique for three-dimensional grain mapping of polycrystals. 1. Direct beam case. J. Appl. Cryst. (2008) 41 , 302-309 (PR) (CO)
[198] Mishin, O.V.; Godfrey, A., Microstructure of ECAE-Processed Copper after Long-Term Room-Temperature Storage. Metallurgical and Materials Transactions A (2008) 39 , 2923-2930 (PR) (CO)
[199] Olsen, U.L.; Schmidt, S.; Poulsen, H.F., A high-spatial-resolution three-dimensional detector array for 30-200 keV X-rays based on structured scintillators. Journal of Synchrotron Radiation (2008) 15 , 363-370 (PR)
[200] Pantleon, W., Resolving the geometrically necessary dislocation content by conventional electron backscattering diffraction. Scripta Materialia (2008) 58 , 994-997 (PR)
[201] Schmidt, S.; Olsen, U.L.; Poulsen, H.F.; Sørensen, H.O.; Lauridsen, E.M.; Margulies, L.; Maurice, C.; Juul Jensen, D., Direct observation of 3-D grain growth in Al-0.1% Mn. Scripta Mater. (2008) 59 , 491-494 (PR)
[202] Thornton, K.; Poulsen, H.F., Three-dimensional materials science: An intersection of three-dimensional reconstructions and simulations. MRS Bulletin (2008) 33 , 587-595 (PR) (CO)
[203] Chen, H.S.; Godfrey, A.; Hansen, N.; Xie, J.X.; Liu, Q., Microstructure–grain orientation relationship in coarse grain nickel cold-rolled to large strain. Mater. Sci. Eng. A (2008) 483-484 , 157-160 (PR)(CO)
[204] Tsuji, N.; Kamikawa, N.; Ueji, R.; Takata, N.; Koyama, H.; Terada, D., Managing both strength and ductility in ultrafine grained steels. ISIJ International (2008) 48 , 1114-1121 (PR) (CO)
[205] Vandermeer, R.A.; Hansen, N., Recovery kinetics of nanostructured aluminum: Model and experiment. Acta Materialia (2008) 56 , 5719-5727 (PR) (CO)
[206] Huang, X.; Kamikawa, N.; Hansen, N., Strengthening mechanisms in nanostructured aluminum. Mater. Sci. Eng. A (2008) 483-484 , 102-104 (PR)
[207] Pantleon, W.; He, W.; Johansson, T.O.; Gundlach, C., Orientation inhomogeneities within individual grains in cold-rolled aluminium resolved by electron backscatter diffraction. Mater. Sci. Eng. A (2008) 483-484 , 668-671 (PR)
[208] Winther, G., Slip systems extracted from lattice rotations and dislocation structures. Acta Materialia (2008) 56 , 1919-1932 (PR)
[209] Jakobsen, B.; Lienert, U.; Almer, J.; Poulsen, H.F.; Pantleon, W., Direct observation of strain in bulk subgrains and dislocation walls by high angular resolution three-dimensional X-ray diffraction. Mater. Sci. Eng. A (2008) 483-484 , 641-643 (PR)(CO)
[210] Wu, G.L.; Juul Jensen, D., Automatic determination of recrystallization parameters based on EBSD mapping. Materials Characterization (2008) 59 , 794-800 (PR) (CO)
[211] Zhang, H.W.; Huang, X.; Hansen, N., Evolution of microstructural parameters and flow stresses toward limits in nickel deformed to ultra-high strains. Acta Materialia (2008) 56 , 5451-5465 (PR)
[212] Winther, G., Slip systems, lattice rotations and dislocation boundaries. Mater. Sci. Eng. A (2008) 483-484 , 40-46 (PR)
[213] Haldrup, K; McGinty, RD; McDowell, D.L., Effects of constraints on lattice re-orientation and strain in polycrystal plasticity simulations. Computational Materials Science (2009) 44, 1198-1207 (PR)(CO)
[214] Haldrup, K.; Nielsen, S.F., Wert, J. A general methodology for full-field plastic strain measurements using X-ray absorption tomography and internal markers. Experimental Mechanics (2008) 48, 199-211 (PR)
[215] He, W.; Ma, W.; Pantleon, W., Microstructure of individual grains in cold-rolled aluminium from orientation inhomogeneities resolved by EBSD. Materials Science and Engineering A (2008) 494 (no.1-2) , 21-27 (PR)
[216] Huang, X.; Kamikawa, N.; Hansen, N., Increasing the ductility of nanostructured Al and Fe by deformation. Materials Science and Engineering A (2008) 493 , 184-189 (PR)
[217] Juul Jensen, D.; Godiksen, R.B., Neutron and synchrotron X-ray studies of recrystallization kinetics. Metallurgical and Materials Transactions A (2008) 39 (no.13) , 3065-3069 (PR)
[218] Cao, W.Q.; Godfrey, A.; Hansen, N.; Liu, Q., Annealing Behavior of Nanostructured Aluminum Produced by Cold Rolling to Ultrahigh Strains. Metallurgical and Materials Transactions A (2009) 40(1), 204-214 (PR)(CO).
[219] Haldrup, K.; McGinty, R.D.; McDowell, D.L.; Effects of constraints on lattice re-orientation and strain in polycrystal plasticity simulations. Computational Materials Science (2009) 44, 1198–1207 (PR)(CO).
[220] Hansen, P.C.; Sørensen, H.O.; Sükösd, Z.; Poulsen, H.F., Reconstruction of Single-Grain Orientation Distribution Functions for Crystalline Materials. SIAM Journal of Imaging Sciences (2009) 2(2), 593-613 (PR)(CO).
[221] Hong, C.S.; Tao, N.R.; Lu, K.; Huang, X., Grain orientation dependence of deformation twinning in pure Cu subjected to dynamic plastic deformation. Scripta Materialia (2009) 61(3), 289-292 (PR)(CO).
[222] Huang, X., Tailoring dislocation structures and mechanical properties of nanostructured metals produced by plastic deformation. Scripta Materialia (2009) 60(12), 1078-1082 (PR).
[223] Jakobsen, B.; Poulsen, H.F.; Lienert, U.; Bernier, J.; Gundlach, C.; Pantleon, W., Stability of dislocation structures in copper towards stress relaxation investigated by high angular resolution 3D X-ray diffraction. Physica Status Solidi A (2009) 206(1), 21-30 (PR)(CO).
[224] Juul Jensen, D.; Schmidt, S., Time Evolution in 3D Metal Microstructures-Recrystallization. Materials Transactions (2009) 50(7), 1655-1659 (PR).
[225] Kamikawa, N.; Huang, X.; Tsuji, N.; Hansen, N., Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed. Acta Materialia (2009) 57(14), 4198-4208 (PR)(CO).
[226] Kazantsev, I.G.; Schmidt, S.; Poulsen, H.F., A discrete spherical X-ray transform of orientation distribution functions using bounding cubes. Inverse Problems (2009) 25(10), Article no. 105009 (PR).
[227] Klement, U.; Hollang L.; Dey S.R.; Battabyal M.; Mishin O.V.; Strotzki W., Effect of Annealing on Microstructural Development in Grain Orientation in Electrodeposited Ni. Solid State Phenomena (2010) 160, 235-240 (PR)(CO).
[228] Krog-Pedersen, S.; Bowen, J.R.; Pantleon, W., Quantitative characterization of the orientation spread within individual grains in copper after tensile deformation. Int. J. Mater. Res. - Z. Metallkunde (2009) 100(3), 433-438 (PR)(CO).
[229] Kulshreshth, A.K.; Alpers, A.; Herman, G.T.; Knudsen, E.; Rodek, L.; Poulsen, H.F., A greedy method for reconstructing polycrystals from three-dimensional X-ray diffraction data. Inverse Problems and Imaging (2009) 3(1), 69-85 (PR)(CO).
[230] Leffers, T.; Ray, R.K., The brass-type texture and its deviation from the copper-type texture. Progress in Materials Science (2009) 54(3), 351-396 (PR)(CO).
[231] Lin, F.X.; Godfrey, A.; Winther, G., Grain orientation dependence of extended planar dislocation boundaries in rolled aluminium. Scripta Materialia (2009) 61(3), 237-240 (PR)(CO).
[232] Lu, L.; Chen, X.; Huang, X.; Lu, K., Revealing the Maximum Strength in Nanotwinned Copper. Science (2009) 323(5914), 607-610 (PR)(CO).
[233] Lu, K.; Hansen, N., Structural refinement and deformation mechanisms in nanostructured metals. Scripta Materialia (2009) 60(12), 1033-1038 (PR)(C0).
[234] Ludwig, W.; King, A.; Reischig, P.; Herbig, M.; Lauridsen E.M.; Schmidt, S.; Proudhon, H.; Forest, S.; Cloetens, P.; du Roscoat, S.; Rolland, S.; Buffiere, J.Y.; Marrow, T.J.; Poulsen, H.F., New opportunities for 3D materials science of polycrystalline materials at the micrometre lengthscale by combined use of X-ray diffraction and X-ray imaging. Mater. Sci. Eng. A (2009) 524(1-2), 69-76 (PR)(CO).
[235] Ludwig, W.; Reischig, P.; King, A.; Herbig, M.; Lauridsen, E.M. ; Johnson, G.; Marrow, T.J.; Buffiere, J.Y., Three-dimensional grain mapping by x-ray diffraction contrast tomography and the use of Friedel pairs in diffraction data analysis. Rev. Sci. Instr. (2009) 80(3), Article no. 033905 (PR)(CO).
[236] Mishin, O.; Bowen, J.R., Through-Thickness Variations of Deformed and Annealed Microstructures in ECAE-Processed Copper. Metall. Mater. Trans. A (2009) 40(7), 1684-1692 (PR).
[237] Olsen, U.L.; Schmidt, S.; Poulsen, H.F.; Linnros, J.; Yun, S.H.; Di Michiel, M.; Martin, T., Structured scintillators for X-ray imaging with micrometre resolution. Nucl. Instr. & Meth. Phys. Res. A (2009) 607(1), 141-144 (PR)(CO).
[238] Pantleon, W.; Wejdemann, C.; Jakobsen, B.; Lienert, U.; Poulsen, H.F., Evolution of deformation structures under varying loading conditions followed in situ by high angular resolution 3DXRD. Mater. Sci. Eng. A (2009) 524(1-2), 55-63 (PR).
[239] Storm, S.; Juul Jensen, D., Effects of clustered nucleation on recrystallization. Scripta Materialia (2009) 60(7), 477-480 (PR).
[240] Stuhr-Hansen, N.; Götze, T.F.; Henriksen, L.; Sølling, T.I.; Langkilde, A.; Sørensen, H.O., Sparing the ortho-position in nucleophilic aromatic substitution-specific displacement of the 4-SePh group in 2,4-bis(phenylseleno)nitrobenzene. Heteroatom Chemistry (2009) 20(2), 101-108 (PR)(CO).
[241] Sørensen, H.O.; Stuhr-Hansen, N., 1,4-Bis(4-chlorophenylseleno)-2,5-dimethoxybenzene. Acta Cryst E (2009) 65(1), O13-U1378 (PR)(CO).
[242] Sørensen, H.O.; Stuhr-Hansen, N., 4-Bromoselenoanisole. Acta Cryst. E (2009) 65, o1665-o1666 (PR)(CO).
[243] Terada, D.; Masui, T.; Kamikawa, N.; Tsuji, N., Microstructure and Mechanical Properties of Ll-0.5 at.% X(=Si, Ag, Mg) Alloys Highly Deformed by ARB Process. Materials Science Forum (2008) 584-586, 547-552 (PR)(CO).
[244] Thomas, H.; Stuhr-Hansen, N.; Westerlund, F.; Laursen, B.W.; Magnussen, M.; Sørensen, H.O.; Bjørnholm, T.; Christensen, J.B., Microwave-assisted McMurry polymerization utilizing low-valent titanium for the synthesis of poly 2,6-[1,5-bis(dodecyloxy)naphthylene vinylene] (PNV). Tetrahedron Letters (2009) 50, 7374-7378 (PR)(CO).
[245] West, S.; Schmidt, S.; Sørensen, H.O.; Winther, G.; Poulsen, H.F.; Margulies, L.; Gundlach, C.; Juul Jensen, D., Direct non-destructive observation of bulk nucleation in 30% deformed aluminum. Scripta Materialia (2009) 61, 875-878 (PR).

Proceedings

[1] Hansen, N.; Juul Jensen, D., Nanostructured metals - processing, microstructure and properties. Inzynieria Materialowa (2001) (no.5) p. 1006-1011 (PR)
[2] * Hughes, D.A.; Hansen, N., Recrystallization in subdivided deformation microstructures. In: Recrystallization and grain growth. Proceedings. Vol. 2. 1st Joint international conference, Aachen (DE), Aug 27-31 2001. Gottstein, G.; Molodov, D.A. (eds.), (Springer-Verlag, Berlin, 2001) p. 659-668 (PR) (CO)
[3] * Juul Jensen, D., Experimental measurements of nucleation and growth rates. In: Recrystallization and grain growth. Proceedings. Vol. 1. 1st Joint international conference, Aachen (DE), Aug 27-31 2001. Gottstein, G.; Molodov, D.A. (eds.), (Springer-Verlag, Berlin, 2001) p. 73-86 (PR)
[4] * Juul Jensen, D.; Kvick, Å.; Lauridsen, E.M.; Lienert, U.; Margulies, L.; Nielsen, S.F.; Poulsen, H.F., Plastic deformation and recrystallization studied by the 3D X-ray microscope. In: Applications of synchrotron radiation techniques to materials science 5th MRS 1999 Fall meeting. Symposium R, Boston, MA (US), Nov 29-Dec 3 1999. Stock, S.R.; Perry, D.L.; Mini, S.M. (eds.), (Materials Research Society, Warrendale, PA, 2000) (Materials Research Society Symposium Proceedings, v. 590) p. 227-240 (PR) (CO)
[5] * Prangnell, P.B.; Bowen, J.R.; Gholinia, A., The formation of submicron and nanocrystalline grain structures by severe deformation. In: Science of metastable and nanocrystalline alloys. Structure, properties and modelling. Proceedings. 22nd Risø International symposium on materials science, Risø (DK), Sep 3-7 2001. Dinesen, A.R.; Eldrup, M.; Juul Jensen, D.; Linderoth, S.; Pedersen, T.B.; Pryds, N.H.; Schrøder Pedersen, A.; Wert, J.A. (eds.), (Risø National Laboratory, Roskilde, 2001) p. 105-126 (PR) (CO)
[6] Godfrey, A.; Juul Jensen, D.; Hansen, N., Measurement of orientation dependent stored energy of deformation on a local scale. In: Recrystallization and grain growth. Proceedings. Vol. 2. 1st Joint international conference, Aachen (DE), 27- Aug 31 2001. Gottstein, G.; Molodov, D.A. (eds.), (Springer-Verlag, Berlin, 2001) p. 843-848 (PR)
[7] Huang, X.; Gao, D.C.; Yang, W.Y.; Sun, Z.Q., Recrystallization of Fe3Al based alloys during superplastic deformation. In: Recrystallization and grain growth. Proceedings. Vol. 2. 1st Joint international conference, Aachen (DE), Aug 27-31 2001. Gottstein, G.; Molodov, D.A. (eds.), (Springer-Verlag, Berlin, 2001) p. 875-880 (PR) (CO)
[8] Huang, X.; Okada, T.; Wert, J.A.; Inoko, F., Deformation structure and recrystallization in an Al single crystal deformed in tension. In: Recrystallization and grain growth. Proceedings. Vol. 2. 1st Joint international conference, Aachen (DE), Aug 27-31 2001. Gottstein, G.; Molodov, D.A. (eds.), (Springer-Verlag, Berlin, 2001) p. 773-778 (PR) (CO)
[9] Huang, X.; Tsuji, N.; Minamino, Y.; Hansen, N., Characterisation of ultrafine microstructures in aluminium heavily deformed by accumulative roll-bonding (ARB). In: Science of metastable and nanocrystalline alloys. Structure, properties and modelling. Proceedings. 22nd Risø international symposium on materials science, Risø (DK), Sep 3-7 2001. Dinesen, A.R.; Eldrup, M.; Juul Jensen, D.; Linderoth, S.; Pedersen, T.B.; Pryds, N.H.; Schrøder Pedersen, A.; Wert, J.A. (eds.), (Risø National Laboratory, Roskilde, 2001) p. 255-262 (PR) (CO)
[10] Klimanek, P.; Pantleon, W.; Seefeldt, M., Modelling of metals plasticity on the base of dislocation and disclination dynamics. In: Proceedings. 3rd International conference on materials structure and micromechanics of fracture (MSMF-3), Brno (CZ), Jun 27-29 2001. (Brno University of Technology, Institute of Physical and Materials Engineering, Faculty of Mechanical Engineering, Brno, 2001) p. 248-255 (PR) (CO)
[11] Lauridsen, E.M.; Schmidt, S.; Margulies, L.; Poulsen, H.F.; Juul Jensen, D., Growth kinetics of individual cube grains as studied by the 3D X-ray diffraction microscope. In: Recrystallization and grain growth. Proceedings. Vol. 1. 1st Joint International Conference, Aachen (DE), Aug 27-31 2001. Gottstein, G.; Molodov, D.A. (eds.), (Springer-Verlag, Berlin, 2001) p. 589-594 (PR)
[12] Lienert, U.; Grigull, S.; Kvick, Å.; Martins, R.V.; Poulsen, H.F., Three dimensional strain measurements in bulk materials with high spatial resolution. In: 6th International conference on residual stresses. Proceedings. ICRS-6, Oxford (GB), Jul 10-12 2000. (Institute of Materials, London, 2000) p. 1050-1057 (PR) (CO)
[13] Lienert, U.; Martins, R.; Grigull, S.; Pinkerton, M.; Poulsen, H.F.; Kvick, Å., High spatial resolution strain measurements within bulk materials by slit-imaging. In: Applications of synchrotron radiation techniques to materials science V. MRS 1999 Fall meeting. Symposium R, Boston, MA (US), Nov 29-Dec 3 1999. Stock, S.R.; Perry, D.L.; Mini, S.M. (eds.), (Materials Research Society, Warrendale, PA, 2000) (Materials Research Society Symposium Proceedings, v. 590) p. 241-246 (PR) (CO)
[14] Ludwig, W.; Nielsen, S.F.; Poulsen, H.F.; Bellet, D., Direct observation of grain boundary wetting by synchrotron radiation imaging techniques. 5th International conference on diffusion in materials: DIMAT2000, Gif-sur-Yvette (FR), Jul 17-21 2000. Defect Diffus. Forum (2001) v. 194 p. 1319-1330 (PR) (CO)
[15] Martins, R.V.; Grigull, S.; Lienert, U.; Margulies, L.; Pyzalla, A., Investigation of the residual strain state in highly plastically deformed Al-MMC torsion samples using high energy synchrotron radiation. In: 6th International conference on residual stresses. Proceedings. ICRS-6, Oxford (GB), Jul 10-12 2000. (Institute of Materials, London, 2000) p. 90-97 (PR) (CO)
[16] Martins, R.V.; Lienert, U.; Margulies, L.; Pyzalla, A., Investigation of the strain distribution in an Al-MMC torsion sample using high energy synchrotron radiation. In: Affordable MMCs for high performance applications. Proceedings. TMS Fall meeting 2001, Indianapolis, IN (US), Nov 4-8 2001. (Minerals, Metals and Materials Society, Warrendale, PA, 2001) p. 285-295 (PR) (CO)
[17] Mishin, O.V.; Huang, X.; Bowen, J.R.; Juul Jensen, D., Assessment of microstructural characterisation of heavily deformed materials by electron microscopy. In: Science of metastable and nanocrystalline alloys. Structure, properties and modelling. Proceedings. 22nd Risø international symposium on materials science, Risø (DK), Sep 3-7 2001. Dinesen, A.R.; Eldrup, M.; Juul Jensen, D.; Linderoth, S.; Pedersen, T.B.; Pryds, N.H.; Schrøder Pedersen, A.; Wert, J.A. (eds.), (Risø National Laboratory, Roskilde, 2001) p. 335-340 (PR)
[18] Sabin, T.J.; Winther, G.; Juul Jensen, D., Investigation of relationships between matrix orientations and nuclei at triple junctions. In: Recrystallization and grain growth. Proceedings. Vol. 2. 1st Joint international conference, Aachen (DE), Aug 27-31 2001. Gottstein, G.; Molodov, D.A. (eds.), (Springer-Verlag, Berlin, 2001) p. 809-814 (PR)
[19] Winther, G.; Hansen, N.; Hebesberger, T.; Huang, X.; Pippan, R.; Zehetbauer, M., Dislocation structure of Ni deformed by high pressure torsion. In: Science of metastable and nanocrystalline alloys. Structure, properties and modelling. Proceedings. 22nd Risø international symposium on materials science, Risø (DK), Sep 3-7 2001. Dinesen, A.R.; Eldrup, M.; Juul Jensen, D.; Linderoth, S.; Pedersen, T.B.; Pryds, N.H.; Schrøder Pedersen, A.; Wert, J.A. (eds.), (Risø National Laboratory, Roskilde, 2001) p. 435-440 (PR) (CO)
[20] Winther, G.; Huang, X.; Nielsen, S.F.; Wert, J., Dislocation boundaries and slip systems in uniaxially deformed crystals. In: Material instabilities and patterning in metals. Proceedings. MRS 2001 Spring meeting. Symposium BB, San Francisco, CA (US), Apr 16-20 2001. Zbib, H.M.; Campbell, G.H.; Victoria, M.; Hughes, D.A.; Levine, L.E. (eds.), (Materials Research Society, Warrendale, PA, 2001) (Materials Research Society Symposium Proceedings, v. 683E) BB1.8
[21] Cao, W.Q.; Liu, Q.; Godfrey, A.; Hansen, N., Microstructure and texture evolution during annealing of an aluminium ARB material. Mater. Sci. Forum (2002) v. 408-412 p. 721-726 (PR) (CO)
[22] Huang, X., Determination of Sigma 3 boundary planes in bulk copper samples with different textures. Mater. Sci. Forum (2002) v. 408-412 p. 493-498 (PR)
[23] Huang, X.; Tsuji, N.; Hansen, N.; Minanino, Y., Microtexture of lamellar structures in Al heavily deformed by accumulative roll-bonding (ARB). Mater. Sci. Forum (2002) v. 408-412 p. 715-720 (PR) (CO)
[24] Li, B.L.; Godfrey, A.; Liu, Q., Investigation of macroscopic grain sub-division of an IF-steel during cold-rolling. Mater. Sci. Forum (2002) v. 408-412 p. 1185-1190 (PR) (CO)
[25] Li, Z.J.; Liu, Q.; Godfrey, A., Local texture evolution during rolling deformation of single crystals of {100}<011> orientation. Mater. Sci. Forum (2002) v. 408-412 p. 601-606 (PR) (CO)
[26] Martins, R.V.; Lienert, U.; Margulies, L.; Pyzalla, A., Dynamic in-situ investigation of the texture and strain state within a plastically deformed solid AlMg3 torsion sample using high energy synchrotron radiation. Mater. Sci. Forum (2002) v. 404-407 p. 115-120 (CO)
[27] Savoie, J.; Yiu, H.L.; Lauridsen, E.M.; Margulies, L.; Nielsen, S.F.; Schmidt, S.; Ashton, M.; Sebald, R., Investigation of recrystallization texture evolution during annealing of hot deformed AA3104 alloy. Mater. Sci. Forum (2002) v. 408-412 p. 833-838 (PR) (CO)
[28] Winther, G.; Margulies, L.; Poulsen, H.F.; Schmidt, S.; Larsen, A.W.; Lauridsen, E.M.; Nielsen, S.F.; Terry, A., Lattice rotations of individual bulk grains during deformation. Mater. Sci. Forum (2002) v. 408-412 p. 287-292 (PR)
[29] Yiu, H.L.; Savoie, J.; Lauridsen, E.M.; Bosland, A.; Margulies, L.; Nielsen, S.F.; Schmidt, S.; Zeng, M., Texture evolution during hot deformation and annealing of AA5182 alloy. Mater. Sci. Forum (2002) v. 408-412 p. 1501-1506 (PR) (CO)
[30] * Hansen, N.; Huang, X.; Hughes, D.A., High strain monotonic deformation-structure and strength. In: Ultrafine grained materials 2. 2002 TMS annual meeting and exhibition, Seattle, WA (US), 17-21 Feb 2002. Zhu, Y.T.; Langdon, T.G.; Mishra, R.S.; Semiatin, S.L.; Saran, M.J.; Lowe, T.C. (eds.), (Minerals, Metals and Materials Society, Warrendale, PA, 2002) p. 3-14 (PR) (CO)
[31] * Juul Jensen, D., Microstructural characterization in 3 dimensions. In: Proceedings. Vol. 2. International conference on new challenges in mesomechanics (Mesomechanics 2002), Aalborg (DK), 26-30 Aug 2002. Pyrz, R.; Schjødt-Thomsen, J.; Rauhe, J.C.; Thomsen, T.; Jensen, L.R. (eds.), (Aalborg University, Aalborg, 2002) p. 541-547 (PR)
[32] * Juul Jensen, D.; Lauridsen, E.M.; Vandermeer, R.A., In-situ determination of grain boundary migration during recrystallization. In: Science and technology of interfaces. 2002 TMS annual meeting, international symposium in honor of Dr. Bhakta Rath, Seattle, WA (US), 17-21 Feb 2002. Ankem, S.; Pande, C.S.; Ovid'ko, I.; Ranganathan, S. (eds.), (TMS, Warrendale, PA, 2002) p. 361-374 (PR)
[33] * Poulsen, H.F.; Juul Jensen, D., From 2D to 3D microtexture investigations. Mater. Sci. Forum (2002) v. 408-412 p. 49-66 (PR)
[34] * Winther, G.; Hansen, N., Modelling of mechanical properties at macroscopic, grain and dislocation boundary scales. In: Proceedings. Vol. 1. International conference on new challenges in mesomechanics (Mesomechanics 2002), Aalborg (DK), 26-30 Aug 2002. Pyrz, R.; Schjødt-Thomsen, J.; Rauhe, J.C.; Thomsen, T.; Jensen, L.R. (eds.), (Aalborg University, Aalborg, 2002) p. 121-128 (PR)
[35] * Winther, G.; Huang, X., Boundary characteristics in heavily deformed metals. Adv. Eng. Mater. (2003) v. 5 p. 317-322 (PR)
[36] Nielsen, S.F.; Lauridsen, E.M.; Margulies, L.; Poulsen, H.F.; Schmidt, S.; Juul Jensen, D., In situ characterisation of thermomechanical processes. In: Conference proceedings. International conference on thermomechanical processing: Mechanics, microstructure and control, Sheffield (GB), 23-26 Jun 2002. Palmiere, E.J.; Mahfouf, M.; Pinna, C. (eds.), (University of Sheffield, Department of Engineering Materials, Sheffield, 2003) p. 186-192
[37] Pantleon, W., Dislocation-based behaviour of deformation-induced boundaries during plastic deformation. In: Proceedings. 10. International symposium on plasticity and its current applications (Plasticity '03), Quebec (CA), 7-11 Jul 2003. Khan, A.S.; Kazmi, R.; Zhou, J. (eds.), (NEAT Press, Fulton, MD (US), 2003) p. 292-294
[38] Pantleon, W.; Juul Jensen, D., Orientation inhomogeneities resolved by 3D X-ray diffraction and EBSD. In: Proceedings. 10. International symposium on plasticity and its current applications (Plasticity '03), Quebec (CA), 7-11 Jul 2003. Khan, A.S.; Kazmi, R.; Zhou, J. (eds.), (NEAT Press, Fulton, MD (US), 2003) p. 490-492
[39] Ueji, R.; Huang, X.; Hansen, N.; Tsuji, N.; Minamino, Y., Quantitative analysis of structure-strength relation of commercial purity aluminium deformed by accumulative roll bonding and annealed at low temperature. 4. International conference on processing and manufacturing of advanced materials (THERMEC 2003), Madrid (ES), 7-11 Jul 2003. Mater. Sci. Forum (2003) v. 426-432 p. 405-410 (PR) (CO)
[40] Winther, G., Slip, dislocation structures and lattice rotations. In: Proceedings. 10. International symposium on plasticity and its current applications (Plasticity '03), Quebec (CA), 7-11 Jul 2003. Khan, A.S.; Kazmi, R.; Zhou, J. (eds.), (NEAT Press, Fulton, MD (US), 2003) p. 304-306
[41] Winther, G.; Hansen, N., Characterisation and properties of deformation induced boundaries. In: Conference proceedings. International conference on thermomechanical processing: Mechanics, microstructure and control, Sheffield (GB), 23-26 Jun 2002. Palmiere, E.J.; Mahfouf, M.; Pinna, C. (eds.), (University of Sheffield, Department of Engineering Materials, Sheffield, 2003) p. 85-91
[42] Huang, X., Orientation and misorientation in deformation induced nanostructure. In: Proceedings. 6. Multinational congress on microscopy - European extension, Pula (HR), 1-5 Jun 2003. Milat, O.; Jezek, D. (eds.), (Croatian Society for Electron Microscopy, Zagreb (HR), 2003) p. 189-190
[43] Huang, X., Hansen, N., Microstructural evolution during plastic deformation of metals. ISIJ meeting, Hokudai (JO), 11-13 Oct 2003. Curr. Adv. Mater. Process. (2003) v. 16(no.6), p.1284-1287 (PR)
[44] Huang, X.; Winther, G.; Hansen, N.; Hebesberger, T.; Vorhauer, A.; Pippan, R.; Zehetbauer, M., Microstructure of nickel deformed by high pressure torsion to high strains. 4. International conference on processing and manufacturing of advanced materials (THERMEC 2003), Madrid (ES), 7-11 Jul 2003. Mater. Sci. Forum (2003) v. 426-432 p. 2819-2824 (PR) (CO)
[45] * Hughes, D.A.; Huang, X.; Hansen, N., Quantification and analysis of deformation microstructures. In: Proceedings. 1. International symposium on metallurgical modeling for aluminum alloys, Pittsburgh, PA (US), 13-15 Oct 2003. Tiryakioglu, M.; Lalli, L.A. (eds.), (ASM International, Pittsburgh, PA, 2003) p. 137-144 (PR) (CO)
[46] * Juul Jensen, D.; Vandermeer, R.A., Recrystallisation growth rates in hot deformed aluminium. In: Hot deformation of aluminum alloys 3. 2003 TMS annual meeting, San Diego, CA (US), 2-6 Mar 2003. Jin, Z.; Beaudoin, A.; Bieler, T.A.; Radhakrishnan, B. (eds.), (TMS, Warrendale, PA, 2003) p. 13-25 (PR)
[47] * Lauridsen, E.M., The 3-dimensional X-ray diffraction microscope and its applications to recrystallization studies. 4. International conference on processing and manufacturing of advanced materials (THERMEC 2003), Madrid (ES), 7-11 Jul 2003. Mater. Sci. Forum (2003) v. 426-432 p. 3599-3604 (PR)
[48] * Schmidt, S.; Juul Jensen, D., Recrystallization at the 3DXRD microscope. In: Proceedings. 1. International symposium on metallurgical modeling for aluminum alloys, Pittsburgh, PA (US), 13-15 Oct 2003. Tiryakioglu, M.; Lalli, L.A. (eds.), (ASM International, Pittsburgh, PA, 2003) p. 169-174 (PR)
[49] * Winther, G.; Hansen, N., Analysis and comparison of dislocation structures in cold and hot deformation. In: Hot deformation of aluminum alloys 3. 2003 TMS annual meeting, San Diego, CA (US), 2-6 Mar 2003. Jin, Z.; Beaudoin, A.; Bieler, T.A.; Radhakrishnan, B. (eds.), (TMS, Warrendale, PA, 2003) p. 135-150 (PR)
[50] Barabash, R.; Pantleon, W., Characterization of dislocation boundary evolution with monochromatic X-ray diffraction. In: Evolution of deformation microstructures in 3D. Proceedings. 25. Risø international symposium on materials science, Risø (DK), 6-10 Sep 2004. Gundlach, C.; Haldrup, K.; Hansen, N.; Huang, X.; Juul Jensen, D.; Leffers, T.; Li, Z.J.; Nielsen, S.F.; Pantleon, W.; Wert, J.A.; Winther, G. (eds.), (Risø National Laboratory, Roskilde, 2004) p. 233-238 (PR) (CO)
[51] Van Boxel, S.; Seefeldt, M.; Pantleon, W.; Verlinden, B.; Van Houtte, P., Study of grain subdivision in aluminium using electron back-scattering diffraction. In: Evolution of deformation microstructures in 3D. Proceedings. 25. Risø international symposium on materials science, Risø (DK), 6-10 Sep 2004. Gundlach, C.; Haldrup, K.; Hansen, N.; Huang, X.; Juul Jensen, D.; Leffers, T.; Li, Z.J.; Nielsen, S.F.; Pantleon, W.; Wert, J.A.; Winther, G. (eds.), (Risø National Laboratory, Roskilde, 2004) p. 557-562 (PR) (CO)
[52] Fu, X.; Knudsen E.; Poulsen, H. F.; Herman, G. T.; Carvalho, B.M.; Liao, H.Y., Optimization of an algebraic reconstruction technique for generation of grain maps based on diffraction data, Proc of SPIE (2004), Vol 5535, p. 261-273 (PR) (CO)
[53] Godfrey, A.; Liu, Q.; Juul Jensen, D.; Hansen, N., Local measurements of stored energy: Microstructural and stereological considerations. In: Evolution of deformation microstructures in 3D. Proceedings. 25. Risø international symposium on materials science, Risø (DK), 6-10 Sep 2004. Gundlach, C.; Haldrup, K.; Hansen, N.; Huang, X.; Juul Jensen, D.; Leffers, T.; Li, Z.J.; Nielsen, S.F.; Pantleon, W.; Wert, J.A.; Winther, G. (eds.), (Risø National Laboratory, Roskilde, 2004) p. 317-322 (PR)
[54] Gundlach, C.; Pantleon, W.; Lauridsen, E.M.; Margulies, L.; Doherty, R.D.; Poulsen, H.F., In-situ observation of subgrain evolution during static recovery of cold-rolled aluminium. In: Recrystallization and grain growth. Bacroix, B.; Driver, JH. Le Gall, R.; Maurice, Cl., Penelle, R., Réglé, H.; Tabourot, L. (eds.), Mater. Sci. Forum (2004) v. 467-470 p. 1389-1394 (PR)
[55] Haldar, A.; Huang, X.; Leffers, T.; Hansen, N.; Ray, R.K., Grain orientation effect on the three dimensional morphology of microstructures in a warm-rolled IF steel. In: Evolution of deformation microstructures in 3D. Proceedings. 25. Risø international symposium on materials science, Risø (DK), 6-10 Sep 2004. Gundlach, C.; Haldrup, K.; Hansen, N.; Huang, X.; Juul Jensen, D.; Leffers, T.; Li, Z.J.; Nielsen, S.F.; Pantleon, W.; Wert, J.A.; Winther, G. (eds.), (Risø National Laboratory, Roskilde, 2004) p. 329-336 (PR) (CO)
[56] Huang, X.; Vorhauer, A.; Winther, G.; Hansen, N.; Pippan, R.; Zehetbauer, Evolution of microstructural morphology and boundary spacing during high pressure torsion of nickel. In: Ultrafine grained materials 3. 2004 TMS annual meeting and exhibition, Charlotte, NC (US), 14-18 Mar 2004. Zhu, Y.T.; Langdon, T.G.; Valiev, R.Z. (eds.), (Minerals, Metals and Materials Society, Warrendale, PA, 2004) p. 235-240 (PR) (CO)
[57] Juul Jensen, D.; Lund, M.D., Larsen, A.W.; Bowen, J.R., Recrystallization kinetics in the bulk and at the surface. In: Recrystallization and grain growth. Bacroix, B.; Driver, JH. Le Gall, R.; Maurice, Cl., Penelle, R., Réglé, H.; Tabourot, L. (eds.), Mater. Sci. Forum (2004) v. 467-470 p. 147-152 (PR)
[58] Knudsen, T.; Winther, G.; Hansen, N., Microstructural evolution in aluminium (AA1050) plane strain compressed at 0.7 T_M. In: Evolution of deformation microstructures in 3D. Proceedings. 25. Risø international symposium on materials science, Risø (DK), 6-10 Sep 2004. Gundlach, C.; Haldrup, K.; Hansen, N.; Huang, X.; Juul Jensen, D.; Leffers, T.; Li, Z.J.; Nielsen, S.F.; Pantleon, W.; Wert, J.A.; Winther, G. (eds.), (Risø National Laboratory, Roskilde, 2004) p. 383-388 (PR)
[59] Larsen, AW.; Gundlach, C; Poulsen, HF.; Margulies, L.; Xing, Q; Juul Jensen, D., In situ investigation of bulk nucleation by X-ray diffraction. In: Recrystallization and grain growth. Bacroix, B.; Driver, JH. Le Gall, R.; Maurice, Cl., Penelle, R., Réglé, H.; Tabourot, L. (eds.), Mater. Sci. Forum (2004) v. 467-470 p. 81-86 (PR)
[60] Li, Z.J.; Winther, G.; Hansen, N., Mechanical effects of 3D morphology of planar dislocation boundaries. In: Evolution of deformation microstructures in 3D. Proceedings. 25. Risø international symposium on materials science, Risø (DK), 6-10 Sep 2004. Gundlach, C.; Haldrup, K.; Hansen, N.; Huang, X.; Juul Jensen, D.; Leffers, T.; Li, Z.J.; Nielsen, S.F.; Pantleon, W.; Wert, J.A.; Winther, G. (eds.), (Risø National Laboratory, Roskilde, 2004) p. 411-416 (PR)
[61] Lienert, U.; Almer, J.; Jakobsen, B.; Poulsen, H.F.; Pantleon, W., Observation of dislocation structure evolution by analysis of X-ray peak profiles from individual bulk grains. In: Evolution of deformation microstructures in 3D. Proceedings. 25. Risø international symposium on materials science, Risø (DK), 6-10 Sep 2004. Gundlach, C.; Haldrup, K.; Hansen, N.; Huang, X.; Juul Jensen, D.; Leffers, T.; Li, Z.J.; Nielsen, S.F.; Pantleon, W.; Wert, J.A.; Winther, G. (eds.), (Risø National Laboratory, Roskilde, 2004) p. 417-422 (PR) (CO)
[62] Mishin, O.V.; Godfrey, A.; Liu, Q.; Juul Jensen, D., Statistical TEM analysis of boundary misorientations in aluminium deformed to large and extra large strains by ECAE. In: Evolution of deformation microstructures in 3D. Proceedings. 25. Risø international symposium on materials science, Risø (DK), 6-10 Sep 2004. Gundlach, C.; Haldrup, K.; Hansen, N.; Huang, X.; Juul Jensen, D.; Leffers, T.; Li, Z.J.; Nielsen, S.F.; Pantleon, W.; Wert, J.A.; Winther, G. (eds.), (Risø National Laboratory, Roskilde, 2004) p. 445-451 (PR) (CO)
[63] Nielsen, S.F.; Beckmann. F.; Godiksen, R. B.; Haldrup, K.; Poulsen, H. F.; Wert, J. A., Measurement of the components of plastic displacement gradients in three dimensions. Developments in X-Ray Tomography IV, Bonse, U. (ed), Proceedings of SPIE, Bellingham, Washington, 2004, Vol 5535, 485-492 (PR) (CO)
[64] Offerman, S.E.; Zijden, A.C.P. van der; Dijk, H.N. Van; Sietsma, J.; Lauridsen, E.M.; Margulies, L.; Grigull, S.; Poulsen, H.F.; Zwaag, S. van der, Evolving microstructures in carbon steel studied by 3DXRD microscopy. In: Evolution of deformation microstructures in 3D. Proceedings. 25. Risø international symposium on materials science, Risø (DK), 6-10 Sep 2004. Gundlach, C.; Haldrup, K.; Hansen, N.; Huang, X.; Juul Jensen, D.; Leffers, T.; Li, Z.J.; Nielsen, S.F.; Pantleon, W.; Wert, J.A.; Winther, G. (eds.), (Risø National Laboratory, Roskilde, 2004) p. 471-480 (PR) (CO)
[65] Offerman, S.E.; van der Zijden, A.C.P.; van Dijk, N.H.; Sietsma, J.; Lauridsen, E.M.; Margulies, L.; Grigull, S.; Poulsen, H.F.; van der Zwaag, S., Ferrite Nucleation and Growth in Medium-Carbon Steel Studied by 3DXRD Microscopy, in MS&T 2004 Conference Proceedings: Precipitation in Steels - Physical Metallurgy and Property Development, (AIST Warrendale, PA, 2004), v. 1, p. 227-234 (PR) (CO)
[66] Pantleon, W., Disorientations and work-hardening in stage IV. In: Evolution of deformation microstructures in 3D. Proceedings. 25. Risø international symposium on materials science, Risø (DK), 6-10 Sep 2004. Gundlach, C.; Haldrup, K.; Hansen, N.; Huang, X.; Juul Jensen, D.; Leffers, T.; Li, Z.J.; Nielsen, S.F.; Pantleon, W.; Wert, J.A.; Winther, G. (eds.), (Risø National Laboratory, Roskilde, 2004) p. 481-486 (PR)
[67] Pantleon, W., Disorientations and their role on the work-hardening in stage IV, Mater. Sci. Forum (2004) v. 482 p. 155-158 (PR)
[68] Schmidt, S.; Huang, X.; Juul Jensen, D., In situ measurements of growth of nuclei within the bulk of deformed aluminium single crystals. In: Recrystallization and grain growth. Bacroix, B.; Driver, JH. Le Gall, R.; Maurice, Cl., Penelle, R., Réglé, H.; Tabourot, L. (eds.), Mater. Sci. Forum (2004) v. 467-470 p. 189-192 (PR)
[69] Shigekazu, M.; Huang, X.; Furuhara, T.; Maki, T.; Hansen, N., Enhanced structural evolution by martensitic transformation and deformation of IF steels. In: Evolution of deformation microstructures in 3D. Proceedings. 25. Risø international symposium on materials science, Risø (DK), 6-10 Sep 2004. Gundlach, C.; Haldrup, K.; Hansen, N.; Huang, X.; Juul Jensen, D.; Leffers, T.; Li, Z.J.; Nielsen, S.F.; Pantleon, W.; Wert, J.A.; Winther, G. (eds.), (Risø National Laboratory, Roskilde, 2004) p. 453-458 (PR) (CO)
[70] Sui, M.L.; Lu, Q.H.; Huang, X.; Li, D.X.; Hansen, N., 3 dimensional microstructures in electrodeposited and cold rolled copper. In: Evolution of deformation microstructures in 3D. Proceedings. 25. Risø international symposium on materials science, Risø (DK), 6-10 Sep 2004. Gundlach, C.; Haldrup, K.; Hansen, N.; Huang, X.; Juul Jensen, D.; Leffers, T.; Li, Z.J.; Nielsen, S.F.; Pantleon, W.; Wert, J.A.; Winther, G. (eds.), (Risø National Laboratory, Roskilde, 2004) p. 533-538 (PR) (CO)
[71] Vandermeer, R.A.; Juul Jensen, D., Effects on nuclei clustering on recrystallization kinetics. In: Recrystallization and grain growth. Bacroix, B.; Driver, JH. Le Gall, R.; Maurice, Cl., Penelle, R., Réglé, H.; Tabourot, L. (eds.), Mater. Sci. Forum (2004) v. 467-470 p. 193-196 (PR)
[72] Vandermeer, R.A.; Lauridsen, E.M.;Juul Jensen, D., Growth rate distributions during recrystallization of copper. In: Recrystallization and grain growth. Bacroix, B.; Driver, JH. Le Gall, R.; Maurice, Cl., Penelle, R., Réglé, H.; Tabourot, L. (eds.), Mater. Sci. Forum (2004) v. 467-470 p. 197-202 (PR)
[73] Xing, Q.; Huang, X.; Hansen, N., Microstructural coarsening during annealing of cold rolled aluminum. In: Recrystallization and grain growth. Bacroix, B.; Driver, JH. Le Gall, R.; Maurice, Cl., Penelle, R., Réglé, H.; Tabourot, L. (eds.), Mater. Sci. Forum (2004) v. 467-470 p. 209-214 (PR)
[74] * Hansen, N., Deformation microstructures with a structural scale from the micrometre to the nanometre dimension. In: Evolution of deformation microstructures in 3D. Proceedings. 25. Risø international symposium on materials science, Risø (DK), 6-10 Sep 2004. Gundlach, C.; Haldrup, K.; Hansen, N.; Huang, X.; Juul Jensen, D.; Leffers, T.; Li, Z.J.; Nielsen, S.F.; Pantleon, W.; Wert, J.A.; Winther, G. (eds.), (Risø National Laboratory, Roskilde, 2004) p. 13-32 (PR)
[75] * Hansen, N.; Huang, X.; Hughes, D.A., Deformation microstructures. In: Ultrafine grained materials 3. 2004 TMS annual meeting and exhibition, Charlotte, NC (US), 14-18 Mar 2004. Zhu, Y.T.; Langdon, T.G.; Valiev, R.Z. (eds.), (Minerals, Metals and Materials Society, Warrendale, PA, 2004) p. 67-74 (PR)
[76] * Margulies, L.; Poulsen, H.F., Three-dimensional X-ray diffraction (3DXRD) analysis. In: Evolution of deformation microstructures in 3D. Proceedings. 25. Risø international symposium on materials science, Risø (DK), 6-10 Sep 2004. Gundlach, C.; Haldrup, K.; Hansen, N.; Huang, X.; Juul Jensen, D.; Leffers, T.; Li, Z.J.; Nielsen, S.F.; Pantleon, W.; Wert, J.A.; Winther, G. (eds.), (Risø National Laboratory, Roskilde, 2004) p. 61-78 (PR)
[77] * Pantleon, W., Resolving orientation correlations in deformation structures by EBSD. In: Interfacial engineering for optimized properties 3. MRS Spring meeting 2004, San Francisco, CA (US), 12-16 Apr 2004. Schuh, C.A.; Kumar, M.; Randle, V.; Carter, C.B. (eds.), (Materials Research Society, Warrendale PA, 2004) Mat. Res. Soc. Symp. Proc. (2004) v. 819 p. N1.5.1-N1.5.9 (PR)
[78] * Poulsen, H.F.; Fu, X.; Knudsen, E.; Lauridsen, E.M.; Margulies, L.; Schmidt, S., 3DXRD - Mapping grains and their dynamics in 3 dimensions. In: Recrystallization and grain growth. Bacroix, B.; Driver, JH. Le Gall, R.; Maurice, Cl., Penelle, R., Réglé, H.; Tabourot, L. (eds.), Mater. Sci. Forum (2004) v. 467-470 p. 1363-1372 (PR)
[79] * Prangnell, P.B.; Bowen, J.R.; Berta, M.; Apps, P.J.; Bate, P.S., Stability of ultra-fine 'grain structures' produced by severe deformation. In: Recrystallization and grain growth. Bacroix, B.; Driver, JH. Le Gall, R.; Maurice, Cl., Penelle, R., Réglé, H.; Tabourot, L. (eds.), Mater. Sci. Forum (2004) v. 467-470 p. 1261-1270 (PR) (CO)
[80] * Schmidt, S.; Juul Jensen, D., A method for in-situ measurements of the growth in the bulk of deformed single crystals at the 3DXRD microscope. In: Interfacial engineering for optimized properties 3. MRS Spring meeting 2004, San Francisco, CA (US), 12-16 Apr 2004. Schuh, C.A.; Kumar, M.; Randle, V.; Carter, C.B. (eds.), (Materials Research Society, Warrendale PA, 2004) Mat. Res. Soc. Symp. Proc. (2004) v. 819 p N6.3.1-N6.3.6 (PR)
[81] * Tsuji, N.; Huang, X.; Nakashima, H., Microstructure of metals and alloys deformed to ultrahigh strains. In: Evolution of deformation microstructures in 3D. Proceedings. 25. Risø international symposium on materials science, Risø (DK), 6-10 Sep 2004. Gundlach, C.; Haldrup, K.; Hansen, N.; Huang, X.; Juul Jensen, D.; Leffers, T.; Li, Z.J.; Nielsen, S.F.; Pantleon, W.; Wert, J.A.; Winther, G. (eds.), (Risø National Laboratory, Roskilde, 2004) p. 147-170 (PR) (CO)
[82] * Wert, J.A., On the origin and nature of deformation bands in single crystals deformed in tension. In: Evolution of deformation microstructures in 3D. Proceedings. 25. Risø international symposium on materials science, Risø (DK), 6-10 Sep 2004. Gundlach, C.; Haldrup, K.; Hansen, N.; Huang, X.; Juul Jensen, D.; Leffers, T.; Li, Z.J.; Nielsen, S.F.; Pantleon, W.; Wert, J.A.; Winther, G. (eds.), (Risø National Laboratory, Roskilde, 2004) p. 187-210 (PR)
[83] * Winther, G., Slip as a mechanism for structural evolution. In: Evolution of deformation microstructures in 3D. Proceedings. 25. Risø international symposium on materials science, Risø (DK), 6-10 Sep 2004. Gundlach, C.; Haldrup, K.; Hansen, N.; Huang, X.; Juul Jensen, D.; Leffers, T.; Li, Z.J.; Nielsen, S.F.; Pantleon, W.; Wert, J.A.; Winther, G. (eds.), (Risø National Laboratory, Roskilde, 2004) p. 211-226 (PR)
[84] * Huang, X., Extended dislocation boundaries in metals subjected to plane strain deformation. Mat. Sci. Eng. A (2005) v. 409 p. 52-58 (PR)
[85] * Juul Jensen, D., Recrystallisation kinetics: from statics to dynamics and from 2D to 3D. Mat. Sci. Tech. (2005) v. 21 p. 1365-1372 (PR)
[86] * Pantleon, W., Disorientations in dislocation structures. Mater. Sci. Eng. A (2005) v. 400-401 p. 118-124 (PR)
[87] * Wert, J.A.; Thorning, C.T., Grain subdivision in polycrystalline copper subject to tensile deformation. Mat. Sci. Tech. (2005) v. 21 p. 1401-1406 (PR)
[88] Hansen, N.; Huang, X., Structural refinement of interstitial free (IF) steel by deformation and phase transformation. 5th Pacific RIM international conference on advanced materials and processing (PRICM 5), Beijing (CN), 2-5 Nov 2004. Mater. Sci. Forum (2005) v. 475-479 p. 37-42 (PR)
[89] Juul Jensen, D.; Larsen, A.W., Orientation of recrystallization nuclei studied by 3DXRD. 14th international conference on textures of materials (ICOTOM14), Leuven (BE), 11-15 Jul 2005. Mater. Sci. Forum (2005) v. 495-497 p. 1285-1290 (PR)
[90] Juul Jensen, D., Local orientation measurements in 3D. International conference on texture and anisotropy of polycrystals II (ITAP 2), Metz (FR), 7-9 Jul 2004. Solid State Phenom. (2005) v. 105 p. 49-54 (PR)
[91] Li, Z.J.; Winther, G.; Hansen, N., Flow stress anisotropy - effect of microstructure and texture in aluminium and IF steel. 14th international conference on textures of materials (ICOTOM14), Leuven (BE), 11-15 Jul 2005. Mater. Sci. Forum (2005) v.495-497 p. 1541-1546 (PR)
[92] Pantleon, W., Unbiased evaluation of chord length distributions from orientation maps. 14th international conference on textures of materials (ICOTOM14), Leuven (BE), 11-15 Jul 2005. Mater. Sci. Forum (2005) v. 495-497 p. 219-224 (PR)
[93] Winther, G., Testing polycrystal plasticity models on observed lattice rotations and dislocation structures. 14th international conference on textures of materials (ICOTOM14), Leuven (BE), 11-15 Jul 2005. Mater. Sci. Forum (2005) v. 495-497 p. 1013-1018 (PR)
[94] Wu, G.L.; Godfrey, A.; Juul Jensen, D.; Liu, Q., The orientations of nuclei at triple junctions in deformed columnar grain Ni. 14th international conference on textures of materials (ICOTOM14), Leuven (BE), 11-15 Jul 2005. Mater. Sci. Forum (2005) v. 495-497 p. 1309-1314 (PR) (CO)
[95] Bowen, J.R.; Masui, T.; Tsuji, N., Microstructure evolution after large strain deformation in Al-0.13%Mg, Fundamentals of deformation and annealing symposium, Manchester, UK, Mater. Sci. Forum (2007) v. 550 p. 235-240 (PR) (CO)
[96] Dey, S.R.; Lauridsen, E.M.; Fonda, R.W.; Ludwig, W., Combination of X-ray tomography with EBSD: Three dimensional orientation imaging. In: Proceedings of the EBSD Users Meeting, Hindsgavl Castle, Denmark, 4-6 Dec 2006 p. 25-26 (CO)
[97] Kamikawa, N.; Huang, X.; Tsuji, N.; Hansen, N.; Minamino, Y., EBSD and TEM characterization of ultrafine grained high purity aluminum produced by accumulative roll-bonding. International symposium on advanced structural and functional materials design, Osaka (JP), 10-12 Nov 2004. Mater. Sci. Forum (2006) v. 512 p. 91-96 (PR) (CO)
[98] Ustundag, E.; Rogan, R.C.; Daymond, M.R.; Tamura, N.; Margulies, L.; Poulsen, H.F., Multiscale study of internal stress and texture in ferroelectrics. 7th International conference on residual stresses (ICRS7). Mater. Sci. Forum (2005) v. 490-491 p. 28-29 (PR) (CO)
[99] * Huang, X.; Kamikawa, N.; Tsuji, N.; Hansen, N., Correlation between texture and structure in high purity Al processesd by ARB. In: Ultrafine grained materials 4. 2006 TMS annual meeting, San Antonio (US), 12-16 Mar 2006. Zhu, Y.T.; Langdon, T.G.; Horita, Z.; Zehetbauer, M.; Semiatin, S.L.; Lowe, T.C. (eds.), (The Minerals, Metals & Materials Society, Warrendale (US), 2006) p. 307-314 (PR) (CO)
[100] * Huang, X.; Lu, Q.H.; Sui, M.L.; Li, D.X.; Hansen, N., Structural change during cold rolling of electrodeposited copper. International conference on processing and manufacturing of advanced materials (THERMEC), Vancouver (CA), 4-8 Jul 2006. Mater. Sci. Forum (2007) v. 539-543 p. 5013-5018 (PR) (CO)
[101] * Huang, X.; Xing, Q.; Juul Jensen, D.; Hansen, N., Large strain deformation and annealing of aluminium. 10. International conference on aluminum alloys, Vancouver (CA), 9-13 Jul 2006. Mater. Sci. Forum (2006) v. 519-521 p. 78-84 (PR)
[102] * Juul Jensen, D., Recrystallization of AA1050 studied by 3DXRD. 10th International conference on aluminum alloys, Vancouver (CA), 9-13 Jul 2006. Mater. Sci. Forum (2006) v. 519-521 p. 1569-1578 (PR)
[103] * Lienert, U.; Almer, J.; Jakobsen, B.; Pantleon, W.; Poulsen, H.F.; Hennessy, D.; Xiao, C.; Suter, R.M., 3-dimensional characterization of polycrystalline bulk materials using high-energy synchrotron radiation. International conference on processing and manufacturing of advanced materials (THERMEC), Vancouver (CA), 4-8 Jul 2006. Mater. Sci. Forum (2007) v. 539-543 p. 2353-2358 (PR) (CO)
[104] * Pantleon, W.; Jakobsen, B.; Lienert, U.; Almer, J.; Gundlach, C.; Poulsen, H.F., In-situ observation of individual subgrains by 3DXRD during deformation and recovery. In: Anisotropy, texture, dislocations and multiscale modeling in finite plasticity and viscoplasticity, and metal forming. Proceedings of 12th International symposium on plasticity and its current applications, Halifax (CA), 17-22 Jun 2006. Khan, A.S.; Kazmi, R.; Baig, M.; Farrokh, B.; Pandey, A. (eds.), (Neat Press, Fulton, MD, 2006) p. 664-666 (CO)
[105] * Pantleon, W., Deformation structure versus grain structure after severe plastic deformation. 2. International symposium on physics and mechanics of large plastic strains (PMLPS-2007), St. Petersburg (RU), 4-9 Jun 2007. Problems of Materials Science (2007) 52 , 13-23
[106] Barlow, C.Y.; Hansen, N., Metalworking. In: Materials processing handbook. Groza, J.R.; Shackelford, J.F.; Lavernia, E.J.; Powers, M.T. (eds.), (CRC Press, Boca Raton, FL (US), 2007) Chapter 12 (PR) (CO)
[107] Hansen, N., Metal working and dislocation structures. Key Eng. Mater. (2007) 353-358 , 9-16 (PR)
[108] Savran, V.I.; Offerman, S.E.; Dijk, N.F. van; Lauridsen, E.M.; Margulies, L.; Sietsma, J., Growth of individual austenite grains measured with 3DXRD microscopy. , , . Mater. Sci. Forum (2007) 561-565 , 2301-2304 (PR) (CO)
[109] Godiksen, R.B.; Trautt, Z.T.; Upmanyu, M.; Schmidt, S.; Juul Jensen, D., Simulation of recrystallization using molecular dynamics; Effects of the interatomic potential. 3. International conference on recrystallization and grain growth, Jeju Island (KR), 10-15 Jun 2007. Mater. Sci. Forum (2007) 558-559 , 1081-1086 (PR) (CO)
[110] * Juul Jensen, D.; Rowenhorst, D.J.; Schmidt, S., Misorientation aspects of growth during recrystallisation. 3. International conference on recrystallization and grain growth, Jeju Island (KR), 10-15 Jun 2007. Mater. Sci. Forum (2007) 558-559 , 85-92 (PR) (CO)
[111] Chen, H.S.; Godfrey, A.; Hansen, N.; Liu, Q., Recovery and recrystallization as a function of deformed microstructure orientation in coarse grained cold-rolled Ni. 3. International conference on recrystallization and grain growth, Jeju Island (KR), 10-15 Jun 2007. Mater. Sci. Forum (2007) 558-559 , 149-152 (PR) (CO)
[112] * Hansen, N.; Huang, X.; Godfrey, A., Nanostructured aluminium - recovery and recrystallization. 3. International conference on recrystallization and grain growth, Jeju Island (KR), 10-15 Jun 2007. Mater. Sci. Forum (2007) 558-559 , 395-400 (PR) (CO)
[113] Sükösd, Z.; Hannesson, K.; Wu, G.; Juul Jensen, D., 3D spatial distribution of nuclei in 90 % cold rolled aluminium. 3. International conference on recrystallization and grain growth, Jeju Island (KR), 10-15 Jun 2007. Mater. Sci. Forum (2007) 558-559 , 345- (PR)
[114] West, S.S.; Winther, G.; Margulies, L.; Knudsen, E.; Sørensen, H.O.; Schmidt, S.; Juul Jensen, D., Mapping partially recrystallised structures by 3DXRD. 3. International conference on recrystallization and grain growth, Jeju Island (KR), 10-15 Jun 2007. Mater. Sci. Forum (2007) 558-559 , 389-394 (PR)
[115] Wu, G.L.; Juul Jensen, D., Effect of annealing temperature on recrystallisation in Al (AA1200) cold rolled to a true strain of 4. 3. International conference on recrystallization and grain growth, Jeju Island (KR), 10-15 Jun 2007. Mater. Sci. Forum (2007) 558-559 , 395-400 (PR)
[116] Hannesson, K.; Juul Jensen, D., Three dimensional characterization of grain structures by EBSP and 3DXRD. 3. International conference on recrystallization and grain growth, Jeju Island (KR), 10-15 Jun 2007. Mater. Sci. Forum (2007) 558-559 , 192-196 (PR)
[117] Olsen, U.L.; Badel, X.; Linnros, J.; Michiel, M. Di; Martin, T.; Schmidt, S.; Poulsen, H.F., Development of a high-efficiency high-resolution imaging detector for 30-80 keV X-rays. 8. International workshop on radiation imaging detectors, Pisa (IT), 2-6 Jul 2006. Nucl. Instrum. Meth. Phys. Res. A (2007) 576 , 52-55 (PR) (CO)
[118] Jakobsen, B.; Lienert, U.; Almer, J.; Pantleon, W.; Poulsen, H.F., Properties and dynamics of bulk subgrains probed in-situ using a novel X-ray diffraction method. International symposium on fundamentals of deformation and annealing, Manchester (GB), 5-7 Sep 2006. Mater. Sci. Forum (2007) 550 , 613-618 (PR) (CO)
[119] * Hansen, N., Global and local structural evolution during deformation and annealing of FCC metals (Invited Paper and Presentation). International symposium on fundamentals of deformation and annealing, Manchester (GB), 5-7 Sep 2006. Mater. Sci. Forum (2007) 550 , 169-180 (PR)
[120] Offerman, S.E.; Strandlund, H.; Dijk, N.F. van; Sietsma, J.; Lauridsen, E.M.; Margulies, L.; Poulsen, H.F.; Ågren, J.; Zwaag, S. van der, Ferrite formation during slow continuous cooling in steel (Invited Paper and Presentation). International symposium on fundamentals of deformation and annealing, Manchester (GB), 5-7 Sep 2006. Mater. Sci. Forum (2007) 550 , 357-362 (PR) (CO)
[121] Zhang, Y.B.; Li, X.L.; Godfrey, A.; Liu, W.; Liu, Q.; Juul Jensen, D., Cube texture in heavily cold rolled pure nickel. In: Energy materials. Advances in characterization, modelling and application. Proceedings. 29. Risø international symposium on materials science, Risø (DK), 1-5 Sep 2008. Andersen, N.H.; Eldrup, M.; Hansen, N.; Juul Jensen, D.; Nielsen, E.M.; Nielsen, S.F.; Sørensen, B.F.; Pedersen, A.S.; Vegge, T.; West, S.S. (eds.), (Risø National Laboratory for Sustainable Energy, Roskilde, 2008) p. 393-399 (PR)(CO)
[122] Kamikawa, N.; Zhang, H.W.; Huang, X.; Hansen, N., Microstructure and mechanical properties of nanostructured metals produced by high strain deformation. Materials Science Forum (2008) 579 , 135-146 (PR)
[123] Grivel, J.-C.; Abrahamsen, A.B.; Andersen, N.H.; Poulsen, H.F.; Homeyer, J.; Saksl, K.; Bednarcik, J.; Zimmermann, M. v., Synchrotron radiation: A powerful tool for probing superconducting/metal composite wires and tapes (Invited Paper). In: Energy materials. Advances in characterization, modelling and application. Proceedings. 29. Risø international symposium on materials science, Risø (DK), 1-5 Sep 2008. Andersen, N.H.; Eldrup, M.; Hansen, N.; Juul Jensen, D.; Nielsen, E.M.; Nielsen, S.F.; Sørensen, B.F.; Pedersen, A.S.; Vegge, T.; West, S.S. (eds.), (Risø National Laboratory for Sustainable Energy, Roskilde, 2008) (PR)(CO)
[124] Kamikawa, N.; Huang, X.; Winther, G.; Tsuji, N.; Hansen, N., Reversible texture transition during accumulative roll bonding. In: Proceedings (on CD). 15. International conference on the textures of materials (ICOTOM 15), Pittsburgh, PA (US), 1-6 Jun 2008. Rollett, A.D. (ed.), (American Ceramic Society, 2008)(PR) (CO)
[125] Kazantsev, I.G.; Yarovenko, I.P.; Matej, S.; Lewitt, R.M.; Prokhorov, I.V., Statistical validation of geometric model of single scatter in PET. In: Proceedings of the 2008 IEEE Nuclear Science and Medical Imaging Conference (CO)
[126] Kazantsev, I.G.; Herman, G.T.; Cernetic, L., Backprojection-based reconstruction and correction for distance-dependent defocus in cryoelectron microscopy. In: Proceedings of the IEEE International symposium on biomedical imaging (CO)
[127] * Lauridsen, E.M., Ikke-destruktiv karakterisering af stål til off-shore anvendelser. Materialer og energi. Vintermødet 2008, Dansk Metallurgisk Selskab, Roskilde (DK), 9-11 Jan 2008. Brøndsted, P. (ed.), (DMS, Lyngby, 2008) p. 185-191
[128] Mishin, O.V.; Juul Jensen, D.; Hansen, N., Structural parameters and annealing behaviour of heavily rolled aluminium. Aluminium alloys - Their physical and mechanical properties. Proceedings. 11. International conference on aluminium alloys, Aachen (DE), 22-26 Sep 2008. Hirsch, J.; Skrotzki, B.; Gottstein, G. (eds.), (Wiley-VCH Verlag, Weinheim, 2008) p. 1114-1120
[129] * Poulsen, H.F.; Nielsen, S.F.; Olsen, U.L.; Schmidt, S.; Wright, J., Novel synchrotron based techniques for characterization of energy materials (Invited Paper). Energy materials. Advances in characterization, modelling and application. Proceedings. 29. Risø international symposium on materials science, Risø (DK), 1-5 Sep 2008. Andersen, N.H.; Eldrup, M.; Hansen, N.; Juul Jensen, D.; Nielsen, E.M.; Nielsen, S.F.; Sørensen, B.F.; Pedersen, A.S.; Vegge, T.; West, S.S. (eds.), (Risø National Laboratory for Sustainable Energy, Roskilde, 2008) p. 101-122 (PR)(CO)
[130] Sugio, K.; Huang, X., Computer simulation of electron nanodiffraction from polycrystalline materials. In: EMC 2008. Proceedings. Vol. 1: Instrumentation and methods. 14. European microscopy congress, Aachen (DE), 1-5 Sep 2008. Luysberg, M.; Tillmann, K.; Weirich, T. (eds.), (Springer, 2008) p. 227-228 (CO)
[131] West, S.S.; Schmidt, S.; Juul Jensen, D., Experimental quantification of nucleation. In: Energy materials. Advances in characterization, modelling and application. Proceedings. 29. Risø international symposium on materials science, Risø (DK), 1-5 Sep 2008. Andersen, N.H.; Eldrup, M.; Hansen, N.; Juul Jensen, D.; Nielsen, E.M.; Nielsen, S.F.; Sørensen, B.F.; Pedersen, A.S.; Vegge, T.; West, S.S. (eds.), (Risø National Laboratory for Sustainable Energy, Roskilde, 2008) p. 383-389 (PR)
[132] * Winther, G., Multiscale modelling of mechanical anisotropy of metals (Invited Paper and Talk). In: IUTAM symposium on modelling nanomaterials and nanosystems. Proceedings. IUTAM symposium on modelling nanomaterials and nanosystems, Aalborg (DK), 19-22 May 2008. Pyrz, R.; Rauhe, J.C. (eds.), (Springer, Berlin, 2009) p. 89-98
[133] Zhang, H.W.; Huang, X.; Hansen, N.; Pippan, R.; Zehetbauer, M.J., Strengthening of nickel deformed by high pressure torsion. 4. International Conference on Nanomaterials by Severe Plastic Deformation, Goslar (DE), 18-22 Aug 2008. Materials Science Forum (2008) 584-586 , 417-421 (PR)(CO)
[134] * Devincre, B.; Winther, G., Dislocation dynamics simulations of slip system interactions and dislocation boundary formation. Nanostructured metals: Fundamentals to applications - Proceedings 30. Risø Symposium Sept. 7-11 (2009) 15-29 (PR)(CO)
[135] Godfrey, A.; Mishin, O.; Bowen, J.R.; Liu, Q., Characterization of heterogeneity in nanometals deformed to large plastic strains. Nanostructured metals: Fundamentals to applications - Proceedings 30. Risø Symposium Sept. 7-11 (2009) 31-44 (PR)(CO)
[136] * Huang, X.; Tsuji, N.; Pantleon, W., Strengthening mechanisms, flow instabilities and property optimization in nanostructured metals. Nanostructured metals: Fundamentals to applications - Proceedings 30. Risø Symposium Sept. 7-11 (2009) 59-80 (PR)(CO)
[137] Kamikawa, N.; Huang, X.; Hansen, N., Optimization of mechanical properties of nanostructured ultralow carbon IF steel by post-process deformation. Nanostructured metals: Fundamentals to applications - Proceedings 30. Risø Symposium Sept. 7-11 (2009) 205-213 (PR)(CO)
[138] Kamikawa, N.; Huang, X.; Hansen N., Dislocation-Source Hardening in Nanostructured Steel Produced by Severe Plastic Deformation. Materials Science Forum (2010) 638-642, 1959-1964 (PR)(CO).
[139] Kamikawa, N.; Huang, X.; Winther, G.; Tsuji, N.; Hansen, N., Reversible texture transition during accumulative roll bonding. Ceramic Transactions : Applications of Texture Analysis (2009) 201, 669-680 (PR)(CO).
[140] Leffers, T., The variation range for the results of FCC texture simulations based on {111}<110>slip. Ceramic Transactions : Materials Processing and Texture (2009) 200, 743-749. (PR)
[141] Oddershede, J.; Schmidt, S.; Poulsen, H.F.; Margulies, L.; Wright, J.P.; Moseicki, M.; Reimers, W., Measuring the elastic strain of individual grains in a polycrystalline material - extending a micro-scale technique to the nano-regime. Nanostructured metals: Fundamentals to applications - Proceedings 30. Risø Symposium Sept. 7-11 (2009) 277-283 (PR)(CO)
[142] Richter, S.; Martin, S.; Bowen, J.R.; Pantleon, W., Deformation-induced microstructures after tensile deformation of equal channel angular extruded copper. Nanostructured metals: Fundamentals to applications - Proceedings 30. Risø Symposium Sept. 7-11 (2009) 301-308 (PR)(CO)
[143] Sugio, K.; Liu, H.; Poulsen, H.F.; Huang, X., Computer simulation of electron nanodiffraction patterns from overlapping grains. Nanostructured metals: Fundamentals to applications - Proceedings 30. Risø Symposium Sept. 7-11 (2009) 337-342 (PR)(CO)
[144] Toftegaard, H.L.; Huang, X.; Jørgensen, K.C.; Holm, J.; Hansen, N., Microstructural, mechanical and ballistic characterization of nanostructured Al sheets. Nanostructured metals: Fundamentals to applications - Proceedings 30. Risø Symposium Sept. 7-11 (2009) 359-368 (PR)(CO)
[145] Tsuji, N.; Kamikawa, N.; Terada, D.; Huang, X.; Hansen, N., Yield point phenomena in nanostructured pure aluminum. Nanostructured metals: Fundamentals to applications - Proceedings 30. Risø Symposium Sept. 7-11 (2009) 369-375 (PR)(CO)
[146] * Ungár, T.; Pantleon, W., Identifying boundary structures by X-ray diffraction. Nanostructured metals: Fundamentals to applications - Proceedings 30. Risø Symposium Sept. 7-11 (2009) 157-170 (PR)(CO)
[147] Yu, T.; Hansen, N.; Huang, X.; Winther, G., Recovery kinetics of commercial purity aluminium after large strain. Nanostructured metals: Fundamentals to applications - Proceedings 30. Risø Symposium Sept. 7-11 (2009) 393-400 (PR)(CO)
[148] Wei, Y.L.; Huang, X.; Winther, G.; Godfrey, A.; Hansen, N.; Liu, W.; Liu, Q., Correlation between dislocation content and slip systems in cell structures of cube grains of rolled aluminium. Nanostructured metals: Fundamentals to applications - Proceedings 30. Risø Symposium Sept. 7-11 (2009) 377-383 (PR)(CO)
[149] Wei, Y.L.; Huang, X.; Winther, G.; Hansen, N.; Liu, w.; Liu, Q.; Godfrey, A., Cell structures in rolled aluminium and nickel. Nanostructured metals: Fundamentals to applications - Proceedings 30. Risø Symposium Sept. 7-11 (2009) 385-392 (PR)(CO)
[150] Wejdemann, C.; Poulsen, H.F.; Lienert, U.; Pantleon W., The effect of strain path change on subgrain volume fraction determined from in situ X-ray measurements. Mater. Sci. Eng. (2009) 3, 012003 (PR)
[151] Zhang, H.W.; Huang, X.; Pippan, R.; Hansen, N., Thermal behavior of pure Ni deformed by high pressure torsion to ultra-high strain. Nanostructured metals: Fundamentals to applications - Proceedings 30. Risø Symposium Sept. 7-11 (2009) 401-408 (PR)(CO)
[152] Zhang, X.D.; Godfrey, A.; Huang, X.; Hansen, N.; Liu, W.; Liu, Q., Characterization of the microstructure in drawn pearlitic steel wires. Nanostructured metals: Fundamentals to applications - Proceedings 30. Risø Symposium Sept. 7-11 (2009) 409-416 (PR)(CO)
[153] Zhang, Y.; Godfrey, A.; Juul Jensen, D., Effects of strain on recrystallization of nickel metals and nanometals produced by heavy cold rolling. Nanostructured metals: Fundamentals to applications - Proceedings 30. Risø Symposium Sept. 7-11 (2009) 423-430 (PR)(CO)

Books and book chapters

[1] Poulsen, H.F., Three-dimensional X-ray diffraction microscopy. Mapping polycrystals and their dynamics. (Springer, Berlin, 2004) (Springer Tracts in Modern Physics, v. 205) 154 p. (PR)
[2] Alpers, A.; Rodek, L.; Poulsen, H.F.; Knudsen, E.; Herman, G.T., Discrete tomography for generating maps of polycrystals. In: Advances in discrete tomography and its applications. Herman, G.T.; Kuba, A. (eds.), (Birkhäuser, Berlin, 2007) (Applied and Numerical Harmonic Analysis) p. 271-301 (PR) (CO)
[3] Poulsen, H.F., Three dimensional X-ray diffraction. Advanced tomographic methods in materials research and engineering. Banhart, J. (ed.), p. 249-277 (PR)
[4] Poulsen, H.F.; Ludwig, W.; Schmidt, S., 3D X-ray diffraction microscope. Neutrons and synchrotron radiation in engineering materials science - from fundamentals to material and component characterization. Reimers, W.; Pyzalla, A.R.; Schreyer, A.; Clemens, H. (eds.), p. 335-351 (PR) (CO)
[5] Haldrup, K.; Wert, J.A., Quantitative analysis of 3-dimensional plastic strain fields using markers and x-ray absorption tomography. Neutrons and synchrotron radiation in engineering materials science - from fundamentals to material and component characterization. Reimers, W.; Pyzalla, A.R.; Schreyer, A.; Clemens, H. (eds.), p. 371-377 (PR) (CO)
[6] Hansen, N.; Huang, X.; Kamikawa, N., Structure and Strength of IF Steel After Large Deformation. Microstructure and Texture in Steels and Other Materials, Haldar, A.; Suwas, S.; Bhattacharjee, D. (eds.), Springer, p.33-42 (PR).
[7] Liao, X. Z; Huang, X., Transmission electron microscopy of bulk nanostructured metals. Bulk nanostructured materails, Zehetbauer, M. J. and Zhu, Y. T. (eds). p.327-342. (CO)
[8] Mishin, O.V.; Godfrey, A.; Juul Jensen, D., Analysis of deformation structures in FCC materials using EBSD and TEM techniques. Electron Backscatter Diffraction in Materials Science (2nd ed.), Schwartz, A.J.; Kumar, M.; Field, D.P.; Adams B.L. (eds.) , Springer Science+Business Media, p. 263-275 (CO

Contributions to encyclopedia, handbooks and journals for a broader public

[1] Poulsen, H.F.; Kvick, Å., 3D characterization of grains in powders or polycrystals. International Union of Crystallography. Newsletter (2001) (no.24) p. 9-10. (PR) (CO)
[2] Hansen, N., Plastic behavior of metals: Large strains. In: Encyclopedia of materials: Science and technology. Buschow, K.H.J.; Cahn, R.W.; Flemings, M.C.; Ilschner, B.; Kramer, E.J.; Mahajan, S. (eds.), (Pergamon, Oxford, 2001) p. 7040-7050 (PR)
[3] Juul Jensen, D., Annealing textures. In: Encyclopedia of materials: Science and technology. Buschow, K.H.J.; Cahn, R.W.; Flemings, M.C.; Ilschner, B.; Kramer, E.J.; Mahajan, S. (eds.), (Pergamon, Oxford, 2001) p. 318-322 (PR)
[4] Poulsen, H.F.; Juul Jensen, D.; Vaughan, G.B.M., Three-dimensional X-ray diffraction microscopy using high-energy X-rays. MRS Bull. (2004) 29 , 166-169 (PR) (CO)
[5] Hughes, D.A.; Hansen, N., Plastic deformation structures. ASM Handbook v. 9: Metallography and microstructures, ASM International. (2004) p. 192-206 (PR) (CO)
[6] Poulsen, H.F.; Juul Jensen, D.; Vaughan, G.B.M., Three-dimensional X-ray diffraction microscopy using high-energy X-rays. MRS Bull. (2004) 29 , 166-169 (PR) (CO)
[7] Hansen, N.; Vandermeer, R.A., Recovery, recrystallization and grain growth. Encyclopedia of condensed matter physics. Eds. Bassani, F.; Liedl, J.; Wyder, P. Elsevier Ltd. (2005) p. 116-124 (PR)
[8] Juul Jensen, D.; Poulsen, H.F.; Kvick, Å. Metal microstructures in four dimensions: Charaterization. Encyclopedia of materials: Science and technology updates, Elsevier, Oxford (2005) 6 p. doi:10.1016/B0-08-043152-6/02037-4 (PR) (CO)
[9] Hansen, N.; Vandermeer, R.A., Recovery, recrystallization and grain growth. Encyclopedia of condensed matter physics. Eds. Bassani, F.; Liedl, J.; Wyder, P. Elsevier Ltd. (2005) p. 116-124 (PR)
[10] Juul Jensen, D.; Lauridsen, E.M.; Margulies, L.; Poulsen, H.F.; Schmidt, S.; Sørensen, H.O.; Vaughan, G.B.M., X-ray microscopy in four dimensions. Materials Today (2006) v. 9 p. 18-25 (PR) (CO)
[11] Huang, X., Preface to the Viewpoint Set: Nanostructured metals – Advances in processing, characterization and application. Scripta Materialia (2009) 60(12), 1031-1032. (PR)

Ph.D Thesis and Dr. techn. Thesis

[1] Lauridsen, E.M., The 3D X-Ray diffraction microscope and its application to the study of recrystallization kinetics, PhD thesis, 2001 (PR)
[2] Cao, W., Quantitative study on microstructure and mechanical properties of severely plastically deformed materials, PhD thesis, 2003 (PR)
[3] Li, B., Quantitative investigation of microstructural evolution during deformation and recrystallization of IF-steel, PhD thesis, 2003 (PR)
[4] Ueji, R., Study on ultrafine grain formation and improvement of mechanical properties of low-carbon steels by novel thermomechanical processing starting from martensite, PhD thesis, 2003 (PR)
[5] Wu, G., Quantitative study on the deformation microstructure and texture of columnar grain samples during cold rolling, PhD thesis, 2003 (PR)
[6] Poulsen, H.F., 3DXRD. A new probe for materials science. Dr. Techn. Thesis, 2004 (PR)
[7] Larsen, A.W., Quantitative studies of the nucleation of recrystallization in metals utilizing microscopy and X-ray diffraction, PhD thesis, 2005 (PR)
[8] Li, Z., Modelling of Plastic Anisotropy in Deformed Metals, PhD thesis, 2005 (PR)
[9] Gundlach, C., Recovery in aluminium, PhD thesis, 2006 (PR)
[10] Jakobsen, B., In-situ studies of bulk deformation structures: static properties under load and dynamics during deformation, PhD thesis, 2007 (PR)
[11] Haldrup, K., Measurements of local plastic strain in the bulk of optically opaque materials by synchrotron x-ray micro-tomography, PhD thesis, 2007 (PR)
[12] Godiksen, R.B., Simulations of Recrystallization in Metals. PhD thesis, 2008 (PR)
[13] Knudsen, T.A., An experimental study of plastic deformation of materials, PhD thesis, 2008 (PR)
[14] Winther, G., Slip systems, dislocation boundaries and lattice rotations in deformed metals. Doctoral thesis, 2009 (PR)
[15] Olsen, U.L., New generation of efficient high resolution detector for 30-100 keV photons. PhD thesis, 2009 (PR)
[16] West, S.S., Nucleation of Recrystallization studied by EBSP and 3DXRD. PhD thesis, 2009 (PR)
[17] Zhang, X., PhD thesis, Quantitative Investigation of Microstructural Evolution during Cold Wire Drawing of A Pearlitic Steel Wire and Its Relationship with Mechanical Properties. 2009 (PR)
[18] Zhang, Y. ,PhD thesis, Research on Recrystallization and Grain Growth During Annealing of Nickel Cold-Rolled to High Strain. 2009 (PR)

Others, incl. publications in danish

[1] Schmidt, S.; Poulsen, H.F.; Juul Jensen, D., 3D røntgen mikroskopet. In: Karakterisering af materialer - fra atom til makro. Dansk Metallurgisk Selskabs vintermøde, Kolding (DK), 2-4 Jan 2002. Brøndsted, P.; Somers, M.A.J. (eds.), (DMS, Lyngby, 2002) p. 103-114 (PR)
[2] Nielsen, S.F., Ikke destruktiv måling af plastisk deformation i tre dimensioner. In: Metalliske konstruktionsmaterialer - processer, egenskaber, anvendelse. Dansk Metallurgisk Selskabs vintermøde, Fredericia (DK), 8-10 Jan 2002. Somers, M.A.J. (eds.), (DMS, Lyngby, 2003) p. 45-52 (PR)
[3] Wert, J.A., Processing of superplastic aluminium alloys. In: Metalliske konstruktionsmaterialer - processer, egenskaber, anvendelse. Dansk Metallurgisk Selskabs vintermøde, Fredericia (DK), 8-10 Jan 2002. Somers, M.A.J. (eds.), (DMS, Lyngby, 2003) p. 53-69 (PR)
[4] He, Y., Effect of Grain Orientation on Microstructure of Hot-deformed AA1050, Risø-I-2196(EN) 49 p.
[5] Knudsen, T., GFF Basis Material AA 1050, Risø-I- 2143(EN) 53 p.
[6] Haldrup, K.; Nielsen, S.F.; Wert, J.A., Måling af plastiske tøjningsfelter i 3D med røntgen-tomografiske teknikker. In: Metallurgi, design og innovation. Vintermødet 2007, Dansk Metallurgisk Selskab, Middelfart (DK), 10-12 Jan 2007. Brøndsted, P.; Kjeldsteen, P.; Somers, M.A.J. (eds.), (DMS, Lyngby, 2007) p. 113-123
[7] Godiksen, R.B.; Schmidt, S.; Juul Jensen, D., Atomistisk simulering af rekrystallisation (Invited Presentation;paper). In: Metallurgi, design og innovation. Vintermødet 2007, Dansk Metallurgisk Selskab, Middelfart (DK), 10-12 Jan 2007. Brøndsted, P.; Kjeldsteen, P.; Somers, M.A.J. (eds.), (DMS, Lyngby, 2007) p. 27-31